Carbide Tips
Introduction
Tungsten carbide tips and carbide saw blade are commonly used cutting tools. The material of carbide tip and carbide saw blade are usually tungsten carbide, which are also widely used in lathe tool, drill bit, ornamental engraving cutter and dental drill. Why tungsten carbide can have such a wide usage? Because it can keep a longer service time, compared with other materials. Thus tungsten carbide tips and carbide saw blade have a longer service life than other cutting tools. Cemented tungsten carbide tips andcarbide saw bladewill not get rust easily. You can polish them like ordinary steel tools, but tungsten carbide tips and carbide saw blade are very hard, so you need to use different grinding tools. Usually diamond tools and cemented carbide grinding wheels are welcomed.
Carbide saw blades: Circular tungsten carbide blank can be made to be solid carbide saw, also applied as carbide inserts to be welded into the edge of a steel or stainless steel saw body to get super sharp edge with not too high cost. In one word, carbide saw blades has the characters of super sharp and super hard, hence carbide saw blades are widely used in metal forming and machining area.
Wood working tool is a kind of cutting tools which can give wood different shapes and sizes through different cutting method and different wood working tool. Wood working tool can be divided into hand-usage wood working tool and mechanical wood working tool. Mechanical wood working also can be divided into 5 different types: woodworking blade, woodworking tip, woodworking mining tool, woodworking drill bit and mortise machining tool.
Woodworking blade can be divided into round woodworking blade, band-sharp woodworking tool, bar-sharp woodworking tool, chain-sharp woodworking tool and so on. Among them, round woodworking blade and band-sharp woodworking tool are used widest. Woodworking blade, as an important wood working tool, gets more and more popular in machine industry.
Samples Matters: Tungsten carbide tips and carbide saw bladewhich can be available from our common regular inventory, can be offered as samples for free. For some
tungsten carbide tips
and carbide saw blade with irregular customer special required, will be charged. Of course, customers need to pay for the shipping fee. Usually, the lead time of the samples will be within 7 working days。
Minimum Order Quantity: There is no minimum order quantity oftungsten carbide tips and carbide saw blade for the first trial order. But on the second order, the total amount of tungsten carbide tips or carbide saw blade should be not less than 1000 USD.
Specification
|
Grade |
ISO grade |
Cobalt |
Grain size |
Density |
Hardness |
Hardness |
TRS |
|
(Co%) |
(μm) |
(g/cm³) |
(HRA) |
(HV) |
(N/mm²) |
||
|
TU06 |
K05-K10 |
6.0 |
0.4 |
14.80 |
94.0 |
2177 |
3800 |
|
TF06 |
K05-K10 |
6.0 |
0.6 |
14.81 |
93.1 |
2037 |
3600 |
|
TU08 |
K10-K20 |
8.0 |
0.4 |
14.52 |
93.5 |
2099 |
3800 |
|
TU40 |
K20-K40 |
10.0 |
0.8 |
14.40 |
91.8 |
1834 |
3800 |
|
TU40F |
K20-K40 |
10.0 |
0.6 |
14.45 |
92.3 |
1912 |
4000 |
|
TU44 |
K20-K40 |
12.0 |
0.4 |
14.10 |
92.8 |
1990 |
4200 |
|
TU25 |
K20-K40 |
12.0 |
0.5 |
14.06 |
92.5 |
1943 |
3800 |
|
TU45 |
K20-K40 |
13.0 |
0.4 |
13.96 |
92.6 |
1959 |
4000 |
Carbide tips can be made according to customers’ requirements.
Feature
Product name: Tungstencarbide tipand carbide saw blade
Place of Origin: Fujian, China (Mainland)
Brand Name: Toonney
Model Number:CT
Type: tungsten carbide tip and carbide saw blade
Material: Tungsten carbide
Tolerance: As required
Surface treatment:Blank,polished or mirrow polishing
Size:As required
Port: Xiamen
Payment terms: FOB Xiamen
Application
1. TU06wood working tool( Density of wood working tool material: 14.8; HRA of wood working tool material: 94)
Fit for making PCB micro-drilling, micro milling cutter and kinds of hard metal solid tools. Re-command material to make milling cutter of which Dia. is 1.2mm and above.
2. TF06 wood working tool ( Density of wood working tool material: 14.81; HRA of wood working tool material: 93.1)
Fit for cutting aluminum and magnesium alloy, copper base alloy, iron-base alloy, plastic, graphite, carbon fiber etc. Re-commanded material for making drill and mill cutter for aluminum and magnesium material.
3. TU08 wood working tool ( Density of wood working tool material: 14.52; HRA of wood working tool material: 93.5)
High strength and hardness, good for machining acrylic material, re-commanded material for making PCB drill and big drill of which dia. Is 0.7mm and above.
4. TU40woodworking blade( Density of woodworking blade material: 14.4; HRA of woodworking blade material: 91.8)
Re-commanded material for common drill, end mill, specially good to mill and drill the material common die steel, gray iron, Austenit steel, and alloy.
5. TU40F woodworking blade ( Density of woodworking blade material: 14.45; HRA of woodworking blade material: 92.3)
Re-commanded material for making drill,milling cutter etc, to mill and drill steel, stainless steel, cast iron and aluminum alloy of which hardness is below 50HRC.
6. TU44 woodworking blade ( Density of woodworking blade material: 14.1; HRA of woodworking blade material: 92.8)
Fit for making different specification milling cutters, reamer, carving blades etc. specially performs good in tools cutting in high speed for example in cutting quenched steel, aluminum alloy, titanium alloy etc.
7. TU25Tungsten carbide tips( Density of tungsten carbide tips material: 14.06; HRA of tungsten carbide tips material: 92.5)
The material for mill and drill tools to machining material heat treatment steel, cast iron, stainless steel.
8. TU45 Tungsten carbide tips ( Density of tungsten carbide tips material: 13.96; HRA of tungsten carbide tips material: 92.6)
Re-commanded material for all kinds end mill, reamer, carving blade etc., performs good in high speed light cutting area,specially fit for quenched steel, aluminum alloy, titanium alloy etc.
Advantage
1. You have a chance to get free samples of tungsten carbide tip and carbide saw blade even though you want a customized samples. Click here please.
2. OEM&ODM service are welcomed. Toonney tungsten carbide tip plant has a professional team for you to design a special tungsten carbide tip and carbide blade according to your requirements.
3. Toonneycarbide saw blade plantis famous for its after-sale service: if the tungsten carbide tip and carbide saw blade have problems of quality in our side, we will solve this as soon as possible and give you a reasonable discount next time.
4. Toonney carbide saw blade manufacturer can offer a really competitive price of tungsten carbide tip and carbide saw blade. Because there is no other agents between Toonney carbide saw blade manufacturer and customers. Thus much cost can be saved.
5. Toonneytungsten carbide tips factoryis famous for its high quality tungsten carbide tip and carbide saw blade at home and abroad. Toonney’s tungsten carbide tip and carbide saw blade both have a longer service life, good straightness, excellent hardness and strength.
Send product request
Other supplier products
 |
Sintering Furnance | IntroductionBase on years' experience and professional in manufacturing tungsten carbide materials, Toonney sintering furnace plant improves curren... |
|
|
Carbide Tips | Introduction Tungsten carbide tips and carbide saw blade are commonly used cutting tools. The material of carbide tip and carbide saw blade are us... |
 |
Cutting Tools | Introduction Carbide tools/ carbide cutter are usually used for cutting in machine manufacturing, so it also called carbide cutting tools. The ... |
 |
Sintering HIP Furnace | IntroductionBase on years' experience and professional in manufacturing tungsten carbide materials, Toonney sintering furnace plant improves curren... |
 |
Heading Die | Introduction of Heading Die The application in cold heading die area is one of the main applications of tungsten carbide material. Heading die... |
Same products
 |
2 parts fluid mixing dispenser 2 component dosing epoxy PU silicon rubber vacuum system | Seller: 824681 | What is the difference between 2K AB adhesive materials manual potting machine and robot pottingm... |
 |
Horizontal Machining Center | Seller: Xilong (Shanghai) Machine Tool Co., Ltd. | Horizontal Machining Center parts can automatically finish four sides milling, boring, drilling, ... |
 |
Horizontal Lathe | Seller: Xilong (Shanghai) Machine Tool Co., Ltd. | As a professional horizontal lathe manufacturerand horizontal lathe factory, Sealion Machine Tool... |
 |
Gantry Machining Center | Seller: Xilong (Shanghai) Machine Tool Co., Ltd. | SEALION supplies Gantry Machining Center both tables moving type or gantry moving type. Gantry ty... |
 |
Floor Type Boring Mill | Seller: Xilong (Shanghai) Machine Tool Co., Ltd. | Floor Type Boring Mill is suitable for large size jobs to do milling, boring, drilling, etc. The ... |
