CNC Gantry Milling Machine China
XK2308CNC Gantry Milling Machine
CNC Gantry Milling Machine China,
The main performance characteristics：
1 the spindle of the CNC Gantry Machining Centeradopts the high precision spindle assembly, the belt type milling head, the main shaft is the servo motor drive. X, y, Z axis servo control, the direct connect architecture, with automatic lubricating system, machine tools to achieve a rapid motion; X, y, Z three directions to feed with high accuracy high strength ball screw, high feed speed; driving motor through flexible coupling with screw direct coupled, servo servo motor directly deliver power to the high precision ball screw, no backlash to ensure the positioning precision of the machine tool.
2 Taiwan famous brand spindle with high speed and high precision, high rigidity spindle unit, axial and radial load capacity, speed up to 6000rpm; the center of spindle blowing structure, with rapidly in the tool release after cleaning of the spindle cone center of high pressure gas, to ensure the accuracy of tool clamping;
4 Y, X, Z three direction guide rails, the lead screw all uses the airtight protection, guarantees the lead screw and the guide rail clean, guarantees the machine tool transmission and the movement precision;
5 the outer protection of the machine tool is designed with the ring structure, which is safe and reliable;
7 using the centralized automatic lubrication device, timing, quantitative automatic intermittent lubrication, stable and reliable work;
8 the machine electrical system wiring neatly, the structure is reasonable, the electric box seal is good, is equipped with the heat exchange system, guaranteed the good use environment;
10 the machine is easy to operate, flexible and quick.
More information you can views here
Application：
This machine is used in CNC milling, boring, drilling, tapping, processing of steel, cast steel, cast iron etc.. Machine tool accessory head to realize the of all kinds of plate, plate, shell and mould for complex parts in a fixture in complete drilling, milling, boring, reaming, reaming, tapping a variety of processes. It can be used for small batch spare parts, processing and manufacturing, of complex, high precision parts processing more show its superiority, also can compose the automatic production line for mass production, to ensure the parts of product quality and efficient production.
Product main technical parameters:
|
Specifications |
Units |
XK2308 |
|
Table size |
mm |
800x1600 |
|
kg |
3000 |
|
|
Gantry width |
mm |
1200 |
|
Table travel（X.Y.Z） |
mm |
1320x320 |
|
T-type slot numbers / width /space |
mm |
5-22x140 |
|
The moving direction of travel of working table |
mm |
1750 |
|
The sliding seat moving direction of travel |
mm |
1200 |
|
Spindle up and down movement direction travel |
mm |
500 |
|
Distance from spindle end to platform |
mm |
110-610 |
|
Spindle specification (model / installation diameter) |
mm |
BT50-φ155 |
|
Spindle speed |
r/min |
6000 |
|
Fast moving X.Y axis |
mm/min |
10000 |
|
Fast moving Z axis |
mm/min |
5000 |
|
Feed speed (X.Y.Z) |
mm/min |
5-5000 |
Send product request
Other supplier products
 |
vertical CNC lathe | CK5112BCNC Vertical Lathe Machine CNC Lathe Machine The lathe features: vertical CNC latheis a advanced equipment of high performance, widely tech... |
 |
CNC Pipe Threading Lathe China | QK1313CNC Pipe Threading Lathe Machine CNC Lathe Machine CNC Pipe Threading Lathe China The main performance characteristics： Big spindle bore and ... |
 |
Q1313 Pipe Threading Lathe Machine | Q1313Pipe Threading Lathe Machine Lathe Machine The main performance characteristics： Big spindle bore and double chuck allows clamp and process bi... |
|
|
TCK46A Series CNC Lathe | TCK46A SeriesCNC Lathe Slant Bed CNC Lathe Machine CNC Lathe Machine Product features: Highest accuracy Taiwan linear guide ways Higher speed spind... |
|
|
CNC Gantry Milling Machine China | XK2308CNC Gantry Milling Machine CNC Gantry Milling Machine China, The main performance characteristics： 1 the spindle of the CNC Gantry Machining ... |
Same products
 |
The Ultimate Tool for Bubble-Free Displays | Seller: Shenzhen Wikshu Technology Co. | FORWARD FW-16R Bubble Remover and FW-8R Mini Bubble Removal Machine removes screen OCA bubbles du... |
 |
Precision CNC Lathe With Conjoined Oblique Rail Cutter Tower | Seller: Zhejiang Guoyu CNC Machine Tool Co., Ltd. | Technical Characteristics: 45° slant bed base structure, with strict aging treatment, smooth ... |
 |
Rail Welder A Frame aligners railway welding tools | Seller: 834406 | 产品描述 A型车架 A-Frame 是一种导轨对准器，可精确对准要焊接的导轨。该设备在焊接操作期间将导轨固定到位。 |
 |
2 parts fluid mixing dispenser 2 component dosing epoxy PU silicon rubber vacuum system | Seller: 824681 | What is the difference between 2K AB adhesive materials manual potting machine and robot pottingm... |
 |
Horizontal Machining Center | Seller: Xilong (Shanghai) Machine Tool Co., Ltd. | Horizontal Machining Center parts can automatically finish four sides milling, boring, drilling, ... |
