Stirrup Bender Supplier
Stirrup bender is designed to complete straightening,bending and cutting on one machine. Coil is the prefer raw material choice .The machine is capable of providing our clients the most accurate cutting, straightening, bending and high effect, which is widespread used inhigh speed railway, bridge,real estate, reinforcing steel processing factories , etc.
|
Model |
KZ12AX |
|
Raw material |
Coil |
|
Single wire Diameter (mm) |
φ5-13 |
|
Double wire Diameter (mm) |
φ5-10 |
|
Max Bending Angle (°) |
±180 |
|
Max Pulling Speed (m/min) |
110 |
|
Max Bending Speed (°/s) |
1000 |
|
Bending Direction |
Bi-direction |
|
Length Tolerance (mm) |
±2 |
|
Bending Tolerance (°) |
±1 |
|
Single Wire Max Production Capacity (hour) |
900(standard size) |
|
Double Wire Max Production Capacity (hour) |
1800(standard size) |
|
Overall dimension L*W*H (mm) |
12,000x3000x2000 |
|
Labeled electric power (kw) |
30 |
|
Central machine Weight (kg) |
3800 |
|
Cylinder Pressure (Mpa) |
≥0.6 |
|
1450 |
Product Advantages
Principle
The wire rod steel bar is firstly conveyed to the bending mechanism of the steel bar bending machine after horizontal straightening and vertical straightening, and then conveyed to the bending mechanism of the steel bar bending machine, and the flexible bending of the wishing elbow is controlled by the PLC program to quickly realize the bending forming process of the various shapes of the stirrups. Then, the finished product of the stirrup is cut by the steel cutting mechanism. The entire process is fully automated and requires no human intervention.
Send product request
Other supplier products
 |
Easy operation Integrated Rebar Cutting | Model KQW50X Shearing part Max Shear Foree (KN) 1750 Co Model KQW50X Shearing part Max Shear Foree (KN) ... |
 |
rebar shear-line Factory | This cutting machine is used to cut high-tensile steel bars of big diameter into expected-length pieces which will be then sorted and stored, al... |
 |
DOUBLE WIRE STRAIGHTENING & CUTTING MACHINE (KZ12TX) | DOUBLE WIRE STRAIGHTENING & CUTTING MACHINE (KZ12TX),High Speed Straightening Cutting Machine,Double Wire Straightening Cutting Machine High S... |
 |
bridge Stirrup Bender | Grid arch ，as a kind of tunnel arch is commonly used in highway, railway tunnel, and the initial support in mine roadway construction . However,... |
 |
high output Truss Girder Welding Machine | Highlights: International famous trademarks are selected for key driving parts, actuators, and electric/pneumatic components; the life cycle... |
