reduce cost Stirrup bender
Stirrup bender is designed to complete straightening,bending and cutting on one machine. Coil is the prefer raw material choice .The machine is capable of providing our clients the most accurate cutting , straightening, bending and high effect, which is widespread used in high speed railway, bridge, real estate, reinforcing steel processing factories , etc.
|
Model |
KZ16BX |
|
|
Raw material |
coil |
|
|
Production capacity |
Single wire |
φ6 -16 (mm) |
|
Double wire |
φ6-12 (mm) |
|
|
±180° (double direction) |
|
|
1200 (°sec) |
||
|
100 (m/min) |
||
|
Mandrel diameter |
φ25 -φ40(mm) |
|
|
2500 (mm) |
||
|
150 (mm) |
||
|
Length tolerance |
± 1 (mm) |
|
|
Bending tolerance |
±1° |
|
|
Average air-compressed consumption |
12 (l/min), ≥0.9Mpa |
|
|
Average eleetric power consumption |
17 (kw) |
|
|
Labeled electric power |
68 (kw) |
|
|
Voltage |
380 (V) – 50 (Hz) |
|
|
Overall machine weight |
7,000 (Kg) |
|
|
Overall dimension |
12,000 * 2650 * 3000 (mm) |
|
Product Advantages
Steel Bending Machine Principle
The wire rod steel bar is firstly conveyed to the bending mechanism of the after horizontal straightening and vertical straightening, and then conveyed to the bending mechanism of the steel bar bending machine, and the flexible bending of the wishing elbow is controlled by the PLC program to quickly realize the bending forming process of the various shapes of the stirrups. Then, the finished product of the stirrup is cut by the steel cutting mechanism. The entire process is fully automated and requires no human intervention.
Send product request
Other supplier products
 |
Cage Making Machine Factory | The construction of the steel cage is the significant part of the basic bridge construction.In the past of the traditional construction, reinfor... |
 |
Wire bending machine (KZ12BX) | Wire bending machine (KZ12BX),steel wire bending machine,automatic Stirrup bender,automatic Stirrup bending machine steel wire bending machine au... |
 |
rebar shear-line Factory | This cutting machine is used to cut high-tensile steel bars of big diameter into expected-length pieces which will be then sorted and stored, al... |
 |
Easy operation Integrated Rebar Cutting | Model KQW50X Shearing part Max Shear Foree (KN) 1750 Co Model KQW50X Shearing part Max Shear Foree (KN) ... |
 |
Stirrup Bender Supplier | Stirrup bender is designed to complete straightening,bending and cutting on one machine. Coil is the prefer raw material choice .The machine ... |
