JCGP-pressure transmitter
Introduction The principle is that a fluid flowing past a heated temperature sensor removes a known quantity of heat as it passes.In a thermal flowmeter, the fluid has to pass two temperature sensors.One sensor obtains a reference value by measuring the actual process temperature. The second sensor is a heating element and it receives precisely as much energy as is needed to compensate for dispersed heat and maintain a precisely defined temperature difference. The higher the mass flow past the heated temperature sensor, the more heat is dissipated and the more power has to be input to the element to maintain the temperature difference. Heating current, therefore, is a measure of the mass flow of the gas. Application Oxygen, nitrogen, hydrogen, chlorine and mixed gas blast furnace gas, flue gas, biogas, compressed air, natural gas, liquefied gas, primary and secondary air and etc. Features 1. Measure mass flow , no need for humidity and pressure compensation. 2. Large rangeability, flow velocity: 0.1 Nm/s~100Nm/s. 3. No pressure drops, applicable to any section pipe. 4. Anti-corrosion, applicable to corrosive gas. 5. Online installation and maintenance. 6. Measures mass flow directly - without additional pressure and temperature inputs 7. Accurate measurement and operation at very low gas pressures and flow rates 8. Negligible pressure drop
Other supplier products
|
|
JC-3000B Ultrasonic flowmeter |
JC-3000B flowmeter can be virtually applied to a wide range of long-term measurement . Convertor protection class IP67 , transducer protection clas... |
|
|
JC090-electromagnetic flowmeter |
A common flow meter (like a differential pressure and positive displacement flow meters) is themagnetic flow meter, also technically anelectromagne... |
|
|
JCGP-pressure transmitter |
Introduction The principle is that a fluid flowing past a heated temperature sensor removes a known quantity of heat as it passes.In a thermal flow... |
|
|
JC-56L magnetic-level-gauge |
Overview JC-56L series magnetic level gauge is a kind of field indication and control instrument, which is mounted outside or on the top of the tan... |
|
|
JC080-Vortex flowmeter |
APPLICATION & FEATURES
JC-080 series smart vortex flowmeter is mainly used for measuring flow of industrial pipeline fluid, such as gas, ... |
All supplier products
Same products
