Cryogenic Deflashing Mahcine Supplier in China NS-120C
Company Introduction
Showtan Techno - Machine Nanjing Co. , Ltd. , the largest and most well - known manufacture of cryogenic deflashing machine in China, is a subsidiary company of a well - known Japanese cryogenic deflashing machine and gas products manufacture - Showa Denko Gas Products Co. , Ltd. , which is a member of the world famous multinational and comprehensive group - Showa Denko Group from Japan.
Cryogenic DeflashingMachineIntroduction
ProcessingPrinciple
With the decrease of the temperature, rubber/plastic parts enters into hardened, brittle, and crystallized process, its flexibility is gradually lost. It is easily broken by external force when it is under brittle temperature. Flash of the molded products is generally much thinner than finished product itself, it become brittle earlier than product in the low temperature. Cryogenic deflashing machine applies this principle, works in the time range when flash is brittle while products still keeps its flexibility, hit the flashes by high speed projected special plastic media, clear out the brittle burr. The flashes can be easily removed and the product not be damaged.
Application
A. O rings, irregular rubber parts with different material and sizes.
B. Micro electronic product parts
C. Precision elastomeric parts
D. Precision injection moulding plastic parts
E. R & D part runs
F. Die casting products, like zinc aluminum, magnesium alloy
Main benifits
High efficiency: The machine can replace about 60 - 80 worker to removing the flashes.
High precision: It can remove small and hiddened falshes which cannnot be removed by handworkers and improve precision of the products.
Low cost: It also has a feature of lower cost comparing with processing the parts by handworkers.
SPECIFICATIONS
NS -120C
Size: L1400mm * W1300mm * H2300mm
Weight:1500kg
Power Supply: AC380V 50HZ
Electrical Capacity:8KW * 3PH
Design Temp: - 130Deg. C
Design Pressure: 0.5 - 0.7 Mpa
Outer Wall Material: SUS
Frame Material: 100% SUS304
Barrel Capacity:120L
Wheel Speed:6,000 rpm Max
Barrel Speed: 0 -16rpm
Media Throw wheel Size :350
Operation Mode:Press Button
Send product request
Other supplier products
Cryogenic Deflashing Mahcine Supplier in China NS-120C | Company Introduction Showtan Techno - Machine Nanjing Co. , Ltd. , the largest and most well - known manufacture of cryogenic deflashing machine... | |
Cryogenic Deflashing Mahcine Supplier in China NS-120T | Company Introduction Showtan Techno-Machine南京有限公司是中国规模最大,最知名的低温除毛机制造商,是日本知名低温除颤机及气体产品制造商昭和电工气体制品有限公司的子公司,该公司是世界著名的跨国综合集团 - 来自日本的昭和电工集团的成员。 低温脱毛机介... | |
Cryogenic Deflashing Machine Supplier in China NS-60C | Company Introduction Showtan Techno - Machine Nanjing Co. , Ltd. , the largest and most well - known manufacture of cryogenic deflashing machine i... | |
Cryogenic Deflashing Mahcine Supplier in China NS-60T | Company Introduction Showtan Techno - Machine Nanjing Co. , Ltd. , the largest and most well - known manufacture of cryogenic deflashing machine i... |
Same products
JYYJ-H-V6 polyurethane foam spraying machine | Seller: 824810 | -Voltage:380V 50HZ -Heating Power:22KW-26KW -OUTPUT:2-10kg/Min -MAX OUTPUT (Mpa):36Mpa -Matri... | |
JYYJ-Q200D polyurethane foam spraying machine | Seller: 824810 | -Voltage:380V 50HZ -Heating Power:11KW -OUTPUT:2-10kg/Min -MAX OUTPUT (Mpa):25Mpa -Matrial A:... | |
Pentamethylene High Pressure PU Foam Machine /High Pressure Cyclopentane Polyurethane Machine | Seller: 824810 | Features:1. The metering is accurate, and the high-precision metering device is adopted, and the ... | |
High pressure polyurethane foam injection machine | Seller: 824810 | Product Features of High Pressure PU Machine:1. Material injection mixing head can freely move fo... | |
2 part resin bonding and sealing, potting, gasket, form-in-place gasket (FIPG) thermal gap filling machine | Seller: 824810 | FeaturesIndependent development 5-Axis Linkage PCB boards, help produce various shapes product su... |