Hydraulic Power Universal Testing Machine Tensile ,Compression Testing Machine
WAW-C Computer control servo hydraulic universal testing machine adopts under fuel tank host structure. Mainly used for metal and nonmetal material product tensile, compression and bending mechanical test.
If this series testing machine equipped with environment device also can do test with this environment. For example: high temperature tensile testing machine, low temperature tensile and compression testing machine.
It is widely used for the industry of iron, steel, metallurgy and building materials also inspection center, roads and bridges,research institutes, universities and other department.
Main technical specifications:
1> Host:
The host adopts under fuel tank host structure. The tensile space is on the upper of the host. The compression and bending test space is between the lower crosshead and test table. Testing machine photo as follows:
2> Transmission system:
Using the oil pressure transduce to measure the force indirectly. The worm gear transmission device system to adjust the test space. It do not need the screw rotating when you adjust the test space. This made the transmission system and the positioning system separated completely. To ensure the concentricity and durability of the upper and lower jaws.
3> Hydraulic system:
Hydraulic principles as the following system:
4> Software:
Using the Max. Test software.
Technical specification:
Mode |
WAW-300C |
WAW-600C |
WAW-1000C |
||
300KN |
600KN |
1000KN |
|||
Load accuracy |
Within ±1% |
||||
Test space |
Tensile |
600mm |
600mm |
600mm |
|
Compression |
550mm |
550mm |
550mm |
||
Piston stroke |
200mm |
||||
Distance between columns |
450mm |
500mm |
600mm |
||
Tensile fixture |
Round specimen fixture |
Φ6-Φ13mm Φ13-Φ26mm |
Φ13-Φ26mm Φ26-Φ40mm |
||
Flat specimen fixture |
0-15mm |
15-30mm |
|||
The width of flat specimen |
70mm |
80mm |
|||
Flat size |
Φ160mm |
205mm*205mm |
|||
Bending adjust space |
400mm |
400mm |
400mm |
||
Dimension |
800*600 *2100mm |
800*600 *2100mm |
900*680 *2300mm |
||
Power supply |
Three-phase 380V 50HZ (special requirement can be met) |
Send product request
Other supplier products
Bow Spring Centralizers Testing Machine | ||
Hydraulic Power Universal Testing Machine Tensile ,Compression Testing Machine | WAW-C Computer control servo hydraulic universal testing machine adopts under fuel tank host structure. Mainly used for metal and nonmetal material... | |
WDW-100 Bow Spring Centralizers Testing Machine From Chinese Factory | Краткая информация Центраторы испытательная машина недавно развития электронный универсальный материал тестирование машины, которая Приводот винта... | |
Bow Spring Centralizers Testing Machine | Краткая информация Центраторы испытательная машина недавно развития электронный универсальный материал тестирование машины, которая Приводот винта ... | |
100 knBow Spring Centralizers Testing Machine | Краткая информация Центраторы испытательная машина недавно развития электронный универсальный материал тестирование машины, которая Приводот винта ... |
Same products
Xenon Arc Chamber | Seller: Xi’an LIB Environmental Simulation Industry | LIB xenon lamp testchamber can be used for aging tests such as color fastness and cracking of coa... | |
Water Spray Test Chamber | Seller: Xi’an LIB Environmental Simulation Industry | LIB Water Spray Test Chamberis used for the ingress protection tests involves immersing the equip... | |
Salt Spray Chamber | Seller: Xi’an LIB Environmental Simulation Industry | LIB salt spray chamber simulates the salt fog marine climate, is used in the salt spray corrosion... | |
Salt Fog And So2 Corrosion Chamber | Seller: Xi’an LIB Environmental Simulation Industry | LIB salt fog machineand SO2 corrosion chamber generates the different environment conditions that... | |
Reach-In Environmental Chamber | Seller: Xi’an LIB Environmental Simulation Industry | LIB reach in stability chamberssimulate different environmental conditions such as high temperatu... |