Steel Ball Impact Tester
Steel Ball Impact Tester
Function: Determination of whether the safety glazing material has a certain minimum strength and cohesion under impact from a small hard object
Suitable for impact test of safety glass and tempered glass.
Related Standard:
ISO 3537 Road vehicles — Safety glazing materials — Mechanical tests– Clause 6: 227 g ball test, Clause 7:2260 g ball test
GB 15763.3 Safety glazing materials in building Part 3:Laminated glass–Appendix B Drop ball impact specimen support
Apparatus:
1) 1m/3m/5m Ball Drop Impact Testing Device
2) Adsorption and release device of steel ball
3) Steel ball
4) Supporting fixture size: 350 mm*350 mm or 660 mm*660 mm
Technical Data:
Hardened steel ball:
2260g ± 20g, diameter of approximately 82mm
1040g ± 10g, diameter of approximately 63 mm
227g ± 2g, diameter of approximately 38 mm
Steel ball adsorption mode: Electrocircuit controlled electromagnet suction cup
Lifting and lowering mode of control lever: manual or automatic
Drop height of steel ball: 1m /3m/5m/12m, customizable
Supporting fixture:
Support size: 350 mm*350 mm and 660 mm*660 mm (Customized)
Frame width: 15 mm
Steel box height: 150 mm
Rubber gasket: thickness 3 mm, width 15 mm, hardness shore A50
Interposed sheet of rubber: thickness 3 mm, hardness shore A50
Applied Test Pieces Size: 300 mm*300 mm and 610 mm* 610 mm
This testing device confirms to the standards of ISO3537and GB15763.3. It is applicable for the impact performance test of the equipment enclosure. It has the advantages of accurate performance and convenient operation as well as reasonable layout. Adjusted to a certain height, the steel ball, whose weight is required, falls down to hit the testing sample. Then the tester can judge the quality of the sample according to the damage degree of the testing sample. It can be used in the fastness test of the enclosure with the material of plastic, ceramic, acryl and Glass fiber.
Send product request
Other supplier products
 |
Non-standard Sheet Metal Processing for Metal Filter | Electroplating sponge filter Metal filter Material: Sponge plating Thickness: 10 mm Surface: electroplating Size: φ 54 mm Weight: 4 g Process:... |
 |
Metal Bracket Connecting Parts | Name: Non-standard metal bracket Material: Carbon steel, stainless steel, aluminium alloy Application: Mechanical equipment, automobile, building,... |
 |
Roller Wave Tester for Tempered Glass | Roller Wave Tester For Tempered Glass Function: Measurement of arcuate form and wave form of tempered glass Related Standard: 1) GB 15763.2 Safety ... |
 |
ISO 3537 Building Glass Ball Drop Test Equipment | ISO 3537 Building Glass Ball Drop Test Equipment Glazing Materials Ball Test Device Determination of whether the safety glazing material has a cert... |
 |
Flatness Meter(Measuring Span 500 mm) | Flatness Meter (Measuring Span 500 mm) Function: Measurement of arcuate form and wave form of tempered glass Related Standard: 1) GB 15763.2 Safety... |
Same products
 |
WYLIE WL-155 SIM Card Tester for iPhone 14-17 Pro Max & Android | Seller: China PHONEFIX Technology Co., Ltd | WYLIE WL-155 SIM Card Tester is used to detect SIM card circuits and supports dual-SIM detection ... |
 |
HCV1500 High-precision Voltage Sensor | Seller: Shenzhen Hangzhi Precision Electronics Co., Ltd | HCV1500 high-precision voltage sensor is a voltage sensor that can measure DC, AC, pulse and vari... |
 |
Xenon Test Chamber | Seller: Standard International Group (HK) Limited | Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli... |
 |
Single Cable Vertical Flame Tester | Seller: Qinsun Instruments Co., LTD | Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ... |
 |
Safety Helmet Flammability Tester | Seller: Qinsun Instruments Co., LTD | Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda... |
