TSY-500 Static Load Sleeper Testing Machine
The static load sleeper testing machine is a device for testing the static load crack resistance test of concrete sleepers (Type I sleepers, Type II sleepers, Type III sleepers, fork sleepers, bridge sleepers, wide sleepers, etc.). The product conforms to the standard of TB/T1879-2002 "Prestressed Concrete Pillow Static Load Cracking Test Method".
Features:
1.The force measurement of this machine adopts high-precision load sensor, microcomputer program control, electro-hydraulic proportional hydraulic loading system and other technologies.
2.Use the positioning ruler (self-provided) to adjust the position of the sleeper so that the load center coincides with the center of the pressure plate.
3.According to the set working procedure, the piston moves freely.
4.Equipped with three high-precision spoke sensors to ensure accurate data of three separate pressure points, and equipped with special LED crack observation lights. In order to facilitate the sleeper test of foreign standards, the fulcrum can be adjusted.
5.The loading process is adjusted with the variable structure PID control algorithm, the constant speed control error is ≤5%, and the pressure holding control error is ≤0.5%.
6.Loading speed Uniform loading.
7.The static load point can be set arbitrarily, and the data result report is automatically printed.
Main technical parameters and specifications:
1.Model Specification: TSY-500
2.The Maximum Load Value under the Rail (Kn): 500
3.Load Indication Accuracy: ±1%
4.Initial Load (Kn) after Placing the Sleeper: <20
5.Loading Speed (N/s): 3000±300
6.Hold Time (s): 180
7.Piston Maximum Stroke (mm): 250
8.Adjustable Under-rail Loading Distance (mm): 600, 700, 800
9.Adjustable Loading Distance in the Rail (mm): 600, 1500
10.Test space: Distance between Upper and Lower Supports (mm): 430
11.Distance between Four Columns (mm): 820, 900
12.Dimensions: Host (mm): 1720×990×2266
13.Carriage (mm): 3390*700×135
14.Control Cabinet (mm): 820×600×610
15.Related Parameters of Hydraulic Pump Station:
16.Rated Pressure: High Pressure Oil Pump 31.5Mpa
17.Rated Displacement: High Pressure Oil Pump 25ml/rec
18.Motor Power: 1.2KW Speed 980rpm
19.Power Supply Voltage: AC380V±10%, 50Hz with zero line
Other supplier products
|
|
LDCJ-300 Microcomputer Controlled Tensile Stress Relaxation Testing Machine |
This product is suitable for testing equipment for measuring the relaxation properties of metal materials at room temperature. The product complies... |
|
|
WAW-1000S electro-hydraulic servo universal material testing machine |
This product is suitable for metal, non-metal and composite materials, components of tensile, compression, bending, shear and other mechanical prop... |
|
|
TSY-2000A constant loading pressure testing machine (large frame) Jinhua type |
This product is suitable for the compressive strength test of brick, stone, cement, concrete and other materials, and can also be used for the comp... |
|
|
LDWS-50 Constant Temperature And Humidity Curing Controller (ultrasonic atomization) |
This product is suitable for the maintenance of large quantities of concrete,cement products and other test pieces in various laboratories,which in... |
|
|
FZ-31 Boiling Box |
This equipment is one of the commonly used equipment in cement production, construction, scientific research and testing units. The equipment is ma... |
All supplier products
Same products
