Electronic geosynthetics comprehensive strength machine
Scope of application:
It is mainly used for testing and analyzing mechanical properties of metal materials and non-metal materials such as tensile, compression, bending, etc., with three closed-loop control methods of stress and strain displacement, it can calculate the maximum force, tensile strength, bending strength, compressive strength, elastic modulus, fracture elongation, yield strength and other parameters. Test and provide data according to GB and ISO, JS, ASTM, DIN and other international standards.
Meet the standard:
GB/T16491-2022,GB/T15788-2017,GB/ T13763-2010, ASTM D4632M-a15,GB/ T2191, FZ/T01010.
CJ/T452-2014, GB18173.1-2012 and JC/T2112.
Technical parameters:
Maximum test force 10KN
Test machine accuracy level 0.5
Test force measurement range 0.4%-100%6FS ungraded throughout
The relative error of the test force indication value is within ±0.5%
Test force resolution The maximum test force of 1/+500000 the entire resolution is unchanged
Deformation measurement range 0.2%-100%FS
The relative error of the deformation indication value is within ±0.5%
Deformation resolution 1/+500000 of the maximum deformation
Large deformation measuring range 10-800mm
The relative error of large deformation indication is within +0.5%
Large deformation resolution 0.008mm
The relative error of the displacement indication is within +0.5% of the indication
Displacement resolution 0.05um
Force control rate adjustment range 0.01-5%FS/S
The relative error of the force control rate is within +1% of the set value
Deformation rate adjustment range 0.02-5%FS/S
The relative error of deformation control rate is within +1% of the set value
Beam speed adjustment range 0.001-500mm/min
Relative error of beam speed
When the speed {<}0.01mm/min, within +1.0% of the set value
When the speed is 20.01mm/min, the set value is within ±0.2%
Constant force, constant deformation, constant displacement control range 0.5%- 100%FS
Constant force, constant deformation, constant displacement control accuracy
If the set value {<}10%FS is within +1% of the set value
When the set value is ≥10%FS, it is within +0.1% of the set value
Effective drawing space （with fixture）850mm
Effective test width 400mm
Host dimensions （L x W x H）700x510x1940（mm）
Power supply 220V±10%, 750W
The weight of the machine is about 290kg
Send product request
Other supplier products
 |
Powder Wet Vibrating Screen System For Lithium Battery Material Testing | Standard ASTM E11: Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves ISO 3310-1: Test Sieves – Technical Requirements ... |
 |
Single Burning Item | Introduction Single burning instrument (SBI) was measured supplies (excluding floorings) performance at a single burning heat invasion conditions.... |
 |
Fabric Negative-ion Concentration Tester | Standard GB/T 30128-2013: Textiles – Test and Evaluation of Negative Ion Generation Application Functional Textile R&D: Assesses air-p... |
 |
Nonwovens liquid loss tester | Nonwovens liquid loss tester built-in loss of Taiwan and sample fixture for non-woven fabric materials for a specific test fluid slip and loss of p... |
 |
Metallic Cables and Wire Ropes Mechanical Property Testing Machine | Standard YY/T 0812-2010 (China): Specifies mechanical testing protocols for metal cables/cables used in fracture fixation, including fatigue stren... |
Same products
 |
WYLIE WL-155 SIM Card Tester for iPhone 14-17 Pro Max & Android | Seller: China PHONEFIX Technology Co., Ltd | WYLIE WL-155 SIM Card Tester is used to detect SIM card circuits and supports dual-SIM detection ... |
 |
HCV1500 High-precision Voltage Sensor | Seller: Shenzhen Hangzhi Precision Electronics Co., Ltd | HCV1500 high-precision voltage sensor is a voltage sensor that can measure DC, AC, pulse and vari... |
 |
Xenon Test Chamber | Seller: Standard International Group (HK) Limited | Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli... |
 |
Single Cable Vertical Flame Tester | Seller: Qinsun Instruments Co., LTD | Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ... |
 |
Safety Helmet Flammability Tester | Seller: Qinsun Instruments Co., LTD | Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda... |
