Fireproof coatings tester
Sample making:
1. The test plate of the fireproof coating tester (small chamber method) is made of birch five-layer plywood conforming to GB738-75 "broadleaf wood plywood", its size is 300mmx150mmx5mm, and the surface of the sample should be smooth and smooth, without joints and other defects.
2. before the test board is coated with fireproof paint, the state should be adjusted to constant at the temperature of 25±1℃ and the relative humidity of 60%——70% (the weight change of 24h interval is not more than 0.1%)。
3. according to the coating ratio of 200——250g/m2 (thick paste coating allows to increase to 500g/m2) to test the fire retardant coating evenly covered on the surface of the test plate and around, when the need for multiple coating, the interval between two times should be 24h.
The finished specimens shall be adjusted to constant weight according to the condition state specified in 2 articles, and ten specimens of each fireproof coating shall be prepared.
Technical parameters:
The specimen holder can be tilted 450±20
Copper combustion cup: Outer diameter 24mm± 0.1mm,
The wall thickness is 1mm±0.06mm, the height is 17mm±0.1mm and the volume is 6mL
Fuel: Chemically pure grade anhydrous ethanol
Send product request
Other supplier products
 |
Hot Air Thermal Shrinkage Tester STD-AG82 | Application ThisHot Air Thermal Shrinkage Testeruses a high-precision temperature control system and measurement system to accurately test the dry... |
 |
Leather edge oil fatigue testing machine | Product Introduction: Leather edge oil is made of polyvinyl chloride and other resins, used to coat leather, recycled leather, artificial/a colore... |
 |
Multi Finger Scratch/Mar Tester | Standards：Ford BN 108-13Resistance to scratchingGeneral Motors DMN3943、Danmler-Chrysler LP-463DD-18-01 Accessories： 1. Pneumatic, mobile platform... |
 |
Foam Plastic Horizontal Burning Test Machine | This machine is in accordance with the national standard ISO9772 :Determining thecombustion propertiesofthe foam plasticby horizontal combustion te... |
 |
Reciprocating Wear Tester | Standards ASTM F2496: Scratch hardness and adhesion testing for prints/coatings. ISO 1518-1 & -2: Scratch resistance determination for pain... |
Same products
 |
Plastic Smoke Density Tester F313 | Seller: Standard International Group (HK) Limited | The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ... |
 |
Xenon Test Chamber | Seller: Standard International Group (HK) Limited | Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli... |
 |
Single Cable Vertical Flame Tester | Seller: Qinsun Instruments Co., LTD | Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ... |
 |
Safety Helmet Flammability Tester | Seller: Qinsun Instruments Co., LTD | Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda... |
 |
Furniture flammability tester | Seller: Qinsun Instruments Co., LTD | Product details Furniture flammability tester is mainly used to test the combustion performance ... |
