HFW Finned Tube
Unidus can supply either solid or serrated welded finned tubes.These tubes are manufactured specifically to suit the high temperature environment found in furnaces/boliers and waste heat recovery equipment.Our high frequency serrated fin is a metal trip that has been serrated or cut and then helically wound around the specified tube.The fin is welded to the tublar base using the high frequency weld process.The fin can be applied to a wide variety of tubular material with configurations to suit your requirements.TUBE SIZES: 3/4" O.D. to 8" NPSFIN HEIGHT: 3/8" to 1-1/2"FIN THICKNESS: 0.035" to 0.102"Segmented width: 4.5mm or 8 mmFIN PITCH: 1 to 7 fins per inchMaterial: Any material or combination that can be resistance or arc welded
Website:
Other supplier products
|
|
Austenitic Stainless Steel Pipe |
Austenitic stainless steel is stainless steel in high temperature and room temperature. The Ni,Website:, 8%~10% Cr and C about 0.1%, with a stable ... |
|
|
Martensitic Stainless Steel Pipe |
Main grades of martensite：403、410、414、416、416(Se)、420、431、440Introduction: heat treatment can adjust the mechanical properties of stainless steel,W... |
|
|
Nickel-Alloy Tubes |
Nickel-Alloy TubesProductOD(mm)WT(mm)AlloyUNS NO.W.NrG.BStandardNickel and Nickel alloy seamless pipe and tube9~1590.5~20NickelUNS N022002.4060N7AS... |
|
|
Corrugated Tube |
The corrugated tube presents a uniform helical deformation both internally and externally.This deformation creates an internal turbulence that allo... |
|
|
Super Austenitic Stainless Steel Pipe |
Super Austenitic Stainless Steel PipeWhen cr-ni austenitic stainless steel pitting resistance equivalent value (PREN = 3.3 [Mo] [Cr] + + 16 [N]) & ... |
All supplier products
Same products
