Austenitic Stainless Steel Pipe
Austenitic stainless steel is stainless steel in high temperature and room temperature. The Ni,Website:, 8%~10% Cr and C about 0.1%, with a stable austenite structure. Austenitic chromium nickel stainless steel including 18Cr-8Ni and based on the famous Cr, increase Ni content and adding Mo, Cu, Si, Nb, Ti and other elements of the development of high Cr-Ni series steel Austenitic stainless steel is not magnetic and has high toughness and plasticity, but the strength is low, it is impossible to strengthen by phase transformation, which can be strengthened by cold work, such as adding S, Se, Ca, Te and other elements, it is easy to cut.Common grades：304/L/H/LN, 316/L/H/LN/Ti/LMod, 310S/H, 317/L, 321/H, 347H/HFGCommon standard (part):A312 ASTM seamless and welded austenitic stainless steel pipeA790 ASTM general purpose Ferritic / austenitic stainless steel seamless and welded steel tubesASME SA213 boiler, superheater and heat exchanger for Seamless Ferritic and austenitic alloy steelASME SA249 boiler, superheater, heat exchanger and condenser for welded austenitic steel pipeSA789 ASME seamless and Welded Ferritic / austenitic stainless steel tubes for general purposeStainless steel seamless steel tubes for GB/T14976-2002 fluid deliveryStainless steel welded pipe for GB/T12771-2008 fluid transfer......Performance features：1 excellent corrosion resistance2 excellent cold, hot workability3 good plasticity and toughness4 integrated performance is best5 the most applicable scopeDevelopment chart of ordinary austenitic stainless steel grades
Other supplier products
|
|
SA179 Bright Annealed Heat Exchanger Tube |
Specifications:1) Size range: 6 - 114.3mm OD x 1 - 14mm WT2) Heat treatment: annealed,Website:, bright annealed3) Standards: ASTM/ASME A179/SA179, ... |
|
|
Corrugated Tube |
The corrugated tube presents a uniform helical deformation both internally and externally.This deformation creates an internal turbulence that allo... |
|
|
Honed Tubes For Hydraulic Cylinders |
Honed Tube,Website:, with standard DIN2391,EN10305-1/2,GB/8713,we manufacture from OD40mm to 800mm and length 14meter max. Our yearly capacity is 1... |
|
|
Integral Low Fin Tube |
Integral low fin tube is a particular working on the tube by direct extrusion,Website:, that increase the surface, and improve the thermical perfor... |
|
|
Austenitic Stainless Steel Pipe |
Austenitic stainless steel is stainless steel in high temperature and room temperature. The Ni,Website:, 8%~10% Cr and C about 0.1%, with a stable ... |
All supplier products
Same products
