Spark Breakdown Tester
Power frequency spark testing machine
Spark Breakdown Tester
Wire and Cable Detection Equipment
The SPARK TESTERis designed and manufactured in accordance with Standard GB/T3048.9-94 and Standard JB/T4278.10-93 on the basis of learning from similar products at home and abroad, and is suitable for the power frequency spark test on the insulation layer of rubber and plastic wires and cables. In addition, it is known as an important test equipment to ensure the insulation quality of wires and cables.、
The 25KV type power frequency SPARK TESTER meets the test requirements of the new national standard GB/T3048-2007, and is a professional equipment to detect wire, cable, insulation and sheath defects.
It adopts the solid state AC voltage regulation and single-chip microprocessor control technology, characterized by stable output of high voltage (subject to no grid voltage change), high detection sensitivity, good field adaptability, convenient to use, safety and reliability and novel and beautiful structure.
The tester is dedicated for the dielectic strength test on finished cables of insulation wires whose test voltage value is 25KV and below.
Technical indicators
Operating conditions of device
Mains voltageAC220V±10%
Detection voltage: Continuously adjustable
Bead chain of inspection electrode:ø5mm (standard nickel plated bead chain)
Mains frequency50±2Hz
High sensitivity: (600 uA)
Detection mode: Online detection/winding detection
Ambient temperature0~40°C
Maximum number of detected cablesø100MM/150MM
Indicating method of breakdown: Counting function of breakdown number and bell alarm, and the breakdown point is obviously visible.
Send product request
Other supplier products
 |
Wire Winding And Torsion Testing Machine | Wire Winding And Torsion Testing Machine aluminium cable steel reinforced Wire and Cable Detection Equipment Wire Winding Testing Machine,Torsio... |
 |
plastics heat aging test Chamber | LH-401B 250℃ Heat Aging Test Chamber cables heat aging test Chamber,plastics heat aging test Chamber It is mainly suitable for the heat aging test ... |
 |
Scratch Grinding Tester | Scratch Grinding Tester Automobile line inspection equipment Wire and Cable Detection Equipment It is applicable for assessing the scratch-resis... |
 |
LED-UV2 type UV-light irradiation cross-linked cable equipment | LED-UV2 type UV-light irradiation cross-linked cable equipment Ultraviolet Irradiation Crosslinking Equipment UV LED devices are the most advan... |
 |
digital display density measuring instrument | Measurement of specific gravity density of cable material by solid density meter Wire and Cable Detection Equipment digital display density measu... |
Same products
 |
RTDS121C Ceramic Uncooled Thermal Detector | Seller: IRay Technology Co., Ltd. | RTDS121C Ceramic Packaged Uncooled Infrared Detector employs a self-developed 12μm uncooled VO... |
 |
EHS Shore Durometer Hardness Tester Unit | Seller: Mikrometry instruments limited | EHS1A/5D is a high-precision digital shore hardness meter. This EHS digital shore hardness tester... |
 |
EHP210 Leeb Digital Hardness Tester | Seller: Mikrometry instruments limited | EHP210 is a light and portable tester. With 5 inch touch screen design. It is most suitable for t... |
 |
EFGH Advanced Force Indicator | Seller: Mikrometry instruments limited | The EFG20H professional digital advanced force gaugeindicator is designed to work with a wide ran... |
 |
YOYIK Sootblowing Signal Input Terminal DZXL-ZL-E-725 | Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | Pakistan Thermal Power Sootblowing Signal Input Terminal DZXL-ZL-E-725 Dongfang Yoyik Engineering... |
