Zipper torsion tester / Zipper Torsion Testing Machine
Product Introduction:
The zipper torsion tester is used to test the binding strength of the zipper pull head and whether it can withstand the specified torque value, so as to provide various improvement references and quality control basis for production.
According to the criteria:
Standard
QB/T2171-2001
QB/T2172
QB/T2173
Technical parameters:
Torque gauge accuracy ±1%FS
Torque gauge range 0.5-50Kg /cm
The torsion speed is adjustable from 0.5-1.5r/min
Volume 250×450×800mm
It weighs about 50kg
Power supply AC to 220V 50Hz
Send product request
Other supplier products
 |
Catheter Flexibility Tester | Compliance Standards YY/T 1554 - 2017. etc. ISO 10555 -Intravascular catheters- Sterile and single-use catheters ISO 11o70- Catheter introducers... |
 |
Sweating Thermal Manikin ASTM F 2371 | Standards: ASTM F 2371 – Standard Test Method for Measuring the Heat Removal Rate of Personal Cooling Systems Using a Sweating Heated Maniki... |
 |
Xenon Arc Weatherometer | IntroductionThe xenon arc lamp, which is capable of simulating the whole natural sunlight spectrum in the most consistent manner, can reproduce the... |
 |
Vacuum Blood Collection Tube Suction Volume Tester | The main uses, compliance standards, and technical parameters of the Vacuum Blood Collection Tube Aspiration Volume Tester are as follows: Complia... |
 |
Multilayer geotextile single-layer thickness tester丨IS0 9863 | Meet the standard GB/T17598-1998. GB/T 13761.1-2022. JTG E50-2006. IS09863-90 Scope of application The multi-layer sample is mechanically separa... |
Same products
 |
Bottle Wall and Bottom Thickness Tester | Seller: Standard International Group (HK) Limited | The wall and bottom thickness tester for bottles is a measuring instrument widely used in the pha... |
 |
Pinhole Tester / Pinhole Testing Equipment | Seller: Standard International Group (HK) Limited | The pinhole tester for aluminum foil is a device specifically used to detect micro - pinholes in ... |
 |
Cork Puncture and Chip Detection Instrument | Seller: Standard International Group (HK) Limited | The rubber stopper puncture debris detector is a device specifically used to detect the number of... |
 |
Aluminum Ointment Tube Toughness Tester | Seller: Standard International Group (HK) Limited | The ductility tester for aluminum tubes is a device specifically used to detect the ductility ind... |
 |
Vacuum leak tester / Vacuum leak instrument | Seller: Standard International Group (HK) Limited | Vacuum Decay Leak Tester specializes in the detection of leaks in ampoules, vials, injection bott... |
