.

Mechanical load testing machine for photovoltaic modules

Standard

IEC 61215: Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval

IEC 61646: Thin-Film Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval

IEC 62782: Dynamic Mechanical Load Testing for Photovoltaic Modules

UL 1703: Flat-Plate Photovoltaic Modules and Panels

CE Certification(Conformité Européenne)

Product Advantages

Multi-Standard Compliance

5.400 Pa Forward / 2.400 Pa Reverse Loading: Replicates snow/wind loads per IEC 62782.

1.000 Pa Dynamic Testing: 1.000-cycle fatigue simulation for hail/debris impact.

Ultra-Precise Control

0.1N Force Feedback: Low-friction cylinder ensures ±5% pressure accuracy.

7+3s Cycle Timing: Mimics real-world pulsating wind loads.

Automated Testing

Programmable Cycle Count: 1–99.999 cycles with auto-stop at failure.

AI-Powered Failure Detection: Real-time EL imaging correlation for crack analysis.

Safety First

Emergency Shutoff: Dual redundant safety circuits with load cell override.

Overload Protection: 6.000 Pa max pressure cutoff.

Modular Design

Quick-Change Fixtures: Adapts to framed, frameless, and flexible PV modules.

Expandable Test Area: Up to 3.0m × 2.0m for large-format modules.

Product Features

Dual-Mode Operation: Static/dynamic load testing with auto-switching.

10” Touchscreen HMI: Preloaded IEC/UL test sequences with customizable pressure profiles.

Remote Monitoring: Wi-Fi/Ethernet connectivity with SMS/ alerts for failures.

Self-Calibrating System: Auto-tare and linearity checks before each test.

Rust-Resistant Frame:304 stainless steel construction with epoxy coating.

Accessories Included

Testing Kit:

4x PV module clamping fixtures (adjustable for 16–40 mm frames).

10x load distribution pads (anti-skid rubber).

Software Suite:

License key forLoadTest Pro(Windows/Linux).

1-year free access to cloud-based fatigue analysis tools.

Calibration & Safety:

NIST-traceable pressure gauge.

Safety harness kit for large modules.

Maintenance Kit:

Spare O-rings and cylinder seals.

Machine cleaning solution (non-corrosive).

Documentation:

Multilingual quick-start guide (printed + digital).

Compliance certificates for IEC/UL/ISO standards.

Technical Parameters

ParameterSpecification
Test Area 2.8m (L) × 1.8m (D) × 1.95m (H)
Forward Load 5.400 Pa (adjustable)
Reverse Load 2.400 Pa (adjustable)
Dynamic Load 1.000 Pa, 1.000 cycles (7s+3s timing)
Pressure Accuracy ±5% of setpoint
Force Sensor 0.1N resolution, 10 kN capacity
Power Supply 230V AC, 50/60Hz (single-phase)
Air Supply 6–8 bar (clean/dry air required)
Weight 1.200 kg (net) / 1.500 kg (gross)


Send product request

To: Qinsun Instruments Co., LTD
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

Glow wire tester
Glow wire tester F242 Glow-wire tester, By simulating the thermal stress caused by heat source or ignition source such as hot component or overload resistor in a sh...
Medical injection needle rigidity tester
Medical injection needle rigidity tester Standard GB 18457-2001 This standard mandates precise control over needle wall thickness (normal, thin, ultra-thin) and rigidity performance, dir...
Adiabatic Accelerated Calorimeter
Adiabatic Accelerated Calorimeter Product Description Adiabatic Accelerated Calorimeter determines the thermal behavior of samples under adiabatic conditions by keeping the tempe...
Enamel Boiling Water Resistance Tester
Enamel Boiling Water Resistance Tester Product Introduction: The enamel layer boiling water weight loss tester is designed according to QB/T 2590-2003 Appendix A, GBT99892-2015 /ISO 287...
Yellowing resistance test chamber
Yellowing resistance test chamber Applicable standards HG/T3986. ASTM D1748. etc. Scope of application Test method for determining the yellowing resistance of light and white pro...
All supplier products

Same products

Custom Stainless Components for OEM Applications
Custom Stainless Components for OEM Applications Seller: Yongjia County Yaokang Technology Co., Ltd. Our stainless steel float balls are designed for float valves, water tanks, and industrial liquid...
FH-77 Dissolved hydrogen meter
FH-77 Dissolved hydrogen meter Seller: Kelilong Electron Co.,Ltd Pen type dissolved hydrogen detector / dissolved hydrogen meter: used to measure the dissolved hy...
Xenon Arc Weather Ometer
Xenon Arc Weather Ometer Seller: Standard International Group (HK) Limited Get a quote: Whats/App: +86 181 0160 0864 SI4000Xenon Arc Weather Ometer utilizes a xenon lamp ...
Xenotest | Light Fastness Tester Si220 (SunTest)
Xenotest | Light Fastness Tester Si220 (SunTest) Seller: Standard International Group (HK) Limited Get a quote: Whats/App:+86 180 0160 0864 A Light Fastness Tester, or Xenon Tester, Accelerated ...
Ozone Aging Chamber
Ozone Aging Chamber Seller: Standard International Group (HK) Limited Get a quote: Whats/App:+86 156 1874 6768 The Ozone Aging Chamber is a precision testing instrum...