.

Mechanical load testing machine for photovoltaic modules

Standard

IEC 61215: Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval

IEC 61646: Thin-Film Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval

IEC 62782: Dynamic Mechanical Load Testing for Photovoltaic Modules

UL 1703: Flat-Plate Photovoltaic Modules and Panels

CE Certification(Conformité Européenne)

Product Advantages

Multi-Standard Compliance

5.400 Pa Forward / 2.400 Pa Reverse Loading: Replicates snow/wind loads per IEC 62782.

1.000 Pa Dynamic Testing: 1.000-cycle fatigue simulation for hail/debris impact.

Ultra-Precise Control

0.1N Force Feedback: Low-friction cylinder ensures ±5% pressure accuracy.

7+3s Cycle Timing: Mimics real-world pulsating wind loads.

Automated Testing

Programmable Cycle Count: 1–99.999 cycles with auto-stop at failure.

AI-Powered Failure Detection: Real-time EL imaging correlation for crack analysis.

Safety First

Emergency Shutoff: Dual redundant safety circuits with load cell override.

Overload Protection: 6.000 Pa max pressure cutoff.

Modular Design

Quick-Change Fixtures: Adapts to framed, frameless, and flexible PV modules.

Expandable Test Area: Up to 3.0m × 2.0m for large-format modules.

Product Features

Dual-Mode Operation: Static/dynamic load testing with auto-switching.

10” Touchscreen HMI: Preloaded IEC/UL test sequences with customizable pressure profiles.

Remote Monitoring: Wi-Fi/Ethernet connectivity with SMS/ alerts for failures.

Self-Calibrating System: Auto-tare and linearity checks before each test.

Rust-Resistant Frame:304 stainless steel construction with epoxy coating.

Accessories Included

Testing Kit:

4x PV module clamping fixtures (adjustable for 16–40 mm frames).

10x load distribution pads (anti-skid rubber).

Software Suite:

License key forLoadTest Pro(Windows/Linux).

1-year free access to cloud-based fatigue analysis tools.

Calibration & Safety:

NIST-traceable pressure gauge.

Safety harness kit for large modules.

Maintenance Kit:

Spare O-rings and cylinder seals.

Machine cleaning solution (non-corrosive).

Documentation:

Multilingual quick-start guide (printed + digital).

Compliance certificates for IEC/UL/ISO standards.

Technical Parameters

ParameterSpecification
Test Area 2.8m (L) × 1.8m (D) × 1.95m (H)
Forward Load 5.400 Pa (adjustable)
Reverse Load 2.400 Pa (adjustable)
Dynamic Load 1.000 Pa, 1.000 cycles (7s+3s timing)
Pressure Accuracy ±5% of setpoint
Force Sensor 0.1N resolution, 10 kN capacity
Power Supply 230V AC, 50/60Hz (single-phase)
Air Supply 6–8 bar (clean/dry air required)
Weight 1.200 kg (net) / 1.500 kg (gross)


Отправить запрос, связаться с поставщиком

Кому: Qinsun Instruments Co., LTD
Ваш E-mail:
Текст письма:


Send to other suppliers

Другие товары поставщика

Residual Ethylene Oxide Gas Chromatograph
Residual Ethylene Oxide Gas Chromatograph The ethylene oxide residual gas chromatograph is a professional analytical instrument for detecting the residual amount of ethylene oxide in medica...
Car seat component clearance test bench
Car seat component clearance test bench Applicable standards: Car seat component clearance test benches usually follow the following domestic and international standards: QC/T 805-2008 ...
Bone Screw Pull-out Tester
Bone Screw Pull-out Tester Standard YY/T 1504. ASTM F543: standard specifies a test method for measuring the axial force required to extract or fail a metallic bone screw f...
Horizontal paper tensile strength testing machine
Horizontal paper tensile strength testing machine Product Introduction: G103C horizontal tensile strength tester adopts paper tensile strength software, which is a paper resistance tester for meas...
DSC Differential Scanning Calorimeter tester
DSC Differential Scanning Calorimeter tester The Differential Scanning Calorimeter (DSC) measures the heat flow to or from a sample under controlled heating conditions. A small amount of sampl...
Все товары поставщика

Похожие товары

Custom Stainless Components for OEM Applications
Custom Stainless Components for OEM Applications Продавец: Yongjia County Yaokang Technology Co., Ltd. Our stainless steel float balls are designed for float valves, water tanks, and industrial liquid...
FH-77 Dissolved hydrogen meter
FH-77 Dissolved hydrogen meter Продавец: Коллирон электроникс лимитед Pen type dissolved hydrogen detector / dissolved hydrogen meter: used to measure the dissolved hy...
Xenon Arc Weather Ometer
Xenon Arc Weather Ometer Продавец: Standard Group (Hong Kong) Limited Get a quote: Whats/App: +86 181 0160 0864 SI4000Xenon Arc Weather Ometer utilizes a xenon lamp ...
Xenotest | Light Fastness Tester Si220 (SunTest)
Xenotest | Light Fastness Tester Si220 (SunTest) Продавец: Standard Group (Hong Kong) Limited Get a quote: Whats/App:+86 180 0160 0864 A Light Fastness Tester, or Xenon Tester, Accelerated ...
Ozone Aging Chamber
Ozone Aging Chamber Продавец: Standard Group (Hong Kong) Limited Get a quote: Whats/App:+86 156 1874 6768 The Ozone Aging Chamber is a precision testing instrum...