.

Fireproof coatings tester

Sample making:

1. The test plate of the fireproof coating tester (small chamber method) is made of birch five-layer plywood conforming to GB738-75 "broadleaf wood plywood", its size is 300mmx150mmx5mm, and the surface of the sample should be smooth and smooth, without joints and other defects.

2. before the test board is coated with fireproof paint, the state should be adjusted to constant at the temperature of 25±1℃ and the relative humidity of 60%——70% (the weight change of 24h interval is not more than 0.1%)。

3. according to the coating ratio of 200——250g/m2 (thick paste coating allows to increase to 500g/m2) to test the fire retardant coating evenly covered on the surface of the test plate and around, when the need for multiple coating, the interval between two times should be 24h.

The finished specimens shall be adjusted to constant weight according to the condition state specified in 2 articles, and ten specimens of each fireproof coating shall be prepared.

Technical parameters:

The specimen holder can be tilted 450±20

Copper combustion cup: Outer diameter 24mm± 0.1mm,

The wall thickness is 1mm±0.06mm, the height is 17mm±0.1mm and the volume is 6mL

Fuel: Chemically pure grade anhydrous ethanol


Отправить запрос, связаться с поставщиком

Кому: Qinsun Instruments Co., LTD
Ваш E-mail:
Текст письма:


Send to other suppliers

Другие товары поставщика

Bone Screw Pull-out Tester
Bone Screw Pull-out Tester Standard YY/T 1504. ASTM F543: standard specifies a test method for measuring the axial force required to extract or fail a metallic bone screw f...
Steel Structure Fireproof Coating Small Sample Test Furnace
Steel Structure Fireproof Coating Small Sample Test Furnace Product Overview TheSmall Sample Test Furnace for Steel Structure Fireproof Coatingis a specialized thermal testing instrument designed to evaluat...
Falling Sand Abrasion Tester
Falling Sand Abrasion Tester Standards GB811-2022. GB24429 GB/T 38305 GJB1564A GA/T44. GA293 GA294 GA295 GA296 ASTMD968 ASTMD333 ASTMD1395 ASTMD2205 Main applicati...
Floor coverings flammability tester
Floor coverings flammability tester Applications:TheFlammability Test Chamberis used to test the effects of a small source of ignition on floor coverings. It can be used for either th...
Sliding bearing PV friction testing machine
Sliding bearing PV friction testing machine Standard This machine is mainly applicable to GB 7948-1987 plastic bearing limit PV test method, JB/T 7381-2010 powder metallurgy oil bearing PV v...
Все товары поставщика

Похожие товары

Xenon Test Chamber
Xenon Test Chamber Продавец: Standard International Group (HK) Limited Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli...
Single Cable Vertical Flame Tester
Single Cable Vertical Flame Tester Продавец: Qinsun Instruments Co., LTD Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ...
Safety Helmet Flammability Tester
Safety Helmet Flammability Tester Продавец: Qinsun Instruments Co., LTD Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda...
Furniture flammability tester
Furniture flammability tester Продавец: Qinsun Instruments Co., LTD Product details Furniture flammability tester is mainly used to test the combustion performance ...
Flame retardant testing machine
Flame retardant testing machine Продавец: Qinsun Instruments Co., LTD Feature highlights: Flame Retardant Tester is designed for testing plastic runway surface layers...