Shale Shaker
Specifications1.ISO9001 and IQNet certificate
2.Italy Oli motor
3.Simens eletric control Shale Shaker for drilling fluids solids control: Shale shaker for solids control are devices that remove drill cuttings from the drilling fluid whilecirculating and drilling. There are many different designs and research into the best design is constantly ongoing since solids control is vital in keeping downcosts associated with the drilling fluid..The basic design consists of large, flat sheets of wire mesh screens or sieves of various mesh sizes that shakes or vibrates the drill cuttings, commonly shale shaker, across nd off of the screens as the drilling fluid flows through them and back into the , often called a mud system. This separates the drill cuttings, often called solids, from the drilling fluid so that it can be recirculated back down the well bore.In oilfield industry,linear motion shale shaker are widely used for drilling mud solids cotrol of oil gas well drilling for rig.10) Standards: GB, ANSI API, Russia Standard11) Type: Rising Stem Gate Valve12) Connection type: Flange end
Other supplier products
|
|
API 5D Drill Pipe |
Specifications
1)OD:2 -3/8,3-1/2,4- 1/2,5,5-1/2
2)Grade: E75,X95,G105,S135
3)Upset:IU EU IEU
4)Hardbanding:TK34 TK34P
1) OD: 2 7/8", 3 1/2",... |
|
|
API 6A Gate Valve |
Descriptions:
1) Sizes: 2-24
2) Pressure: 150LB, 300LB, 600LB
3) Valve Body: ASTM A216 WCB/CF8/CF8M
4) Disc: ASTM A216 WCB/CF8/CF8M
5) Bonn... |
|
|
Annular BOP |
Annular BOP is an important part of well-control equipments. It mainly applies to control wellhead pressure during drilling workover operations and... |
|
|
API Spec 16C Choke and Kill Manifold |
API Spec 16C Choke and Kill Manifold
·Working Pressure3000PSI--15000PSI
·Nominal Bore2-1/16" --- 4-1/16 "
·Working medium: oil, natural gas, mu... |
|
|
API 5CT Casing and Tubing |
Specifications:
API 5ct casing pipe:
1.Standard:API 5CT & ISO9001:2000
2.Specification:4 1/2"-13 3/8"
3.WT:5.21mm-13.06mm
API 5CT Casing p... |
All supplier products
Same products
