Chromium carbide powder specifically for oil drilling equipment
This chromium carbide powder is black in color, with a particle size of 5-25μm, a purity of over 99%, and extremely low impurity content. The particles have good dispersibility and are easy to mix with the metal matrix. After powder metallurgy sintering, highly wear-resistant parts can be produced. It is applicable to precision bearings, micro gears and other precision instrument components, which can reduce wear and improve the operational accuracy and stability of equipment. The main methods for preparing this powder include the electric arc furnace method and the carbothermal reduction method. Among them, the powder produced by the carbothermal reduction method has a finer particle size and a lower cost, making it suitable for large-scale application. When the oxygen content of the powder is less than 0.2%, it can reduce the pores and inclusions in the coating and improve the density of the coating. After spraying chromium carbide powder on the surface of the valve tappets of a car engine, the wear of the tappets can be reduced by 80%, and the major overhaul cycle of the engine can be prolonged.
Send product request
Other supplier products
 |
Unfinished bar stock - heat treatable | This high-purity titanium carbonitride (TiCN) round bar is fabricated via hot-pressing and sintering of ultrafine TiCN powder (particle size: 1&nda... |
 |
Impact-resistant and non-deformable titanium carbide guide wheel | The guide wheel features high-precision installation holes, with a fit clearance relative to the shaft controlled within the range of 0.005–0... |
 |
Titanium carbide rods - Precision grinding processing | The length of this round bar can be customized according to specific requirements, ranging from 100 mm to 1000 mm. It is suitable for secondary pro... |
 |
Titanium carbide hard rods - Impact resistance | The anti-adhesion performance of tungsten carbide round rods containing titanium carbide is excellent. When machining sticky materials such as alum... |
 |
Titanium carbide powder for the preparation of high-temperature structural component coatings | After the surface of the powder is modified, it can be well combined with organic materials such as resin and plastic to form metal-ceramic composi... |
