Unfinished bar stock - heat treatable
This high-purity titanium carbonitride (TiCN) round bar is fabricated via hot-pressing and sintering of ultrafine TiCN powder (particle size: 1–3 μm, purity ≥ 99.6 wt%). Available in diameters ranging from φ3 mm to φ120 mm and lengths from 50 mm to 1500 mm, dimensions and surface finishes—including single-end or four-end precision grinding, threading, and custom surface treatments—are fully customizable. The material exhibits a theoretical density of 6.68 g/cm³, Vickers hardness equivalent to HRA ≥ 92, compressive strength ≥ 3200 MPa, and fracture toughness ≥ 6.0 MPa·m¹/². Microstructural analysis confirms full densification with no detectable porosity. Surface roughness is controlled to Ra ≤ 0.4 μm; dimensional tolerance is ±0.01 mm, and straightness is maintained at ≤ 0.02 mm/m—free from cracks, inclusions, or other surface defects. The component demonstrates exceptional resistance to wear, high-temperature oxidation (retaining mechanical integrity up to 1200 °C, with continuous service capability ≤ 1600 °C), and chemical corrosion—including exposure to acidic and alkaline environments. It is widely employed in demanding applications such as hardmetal tool blanks, mechanical seals, mining drill bits, precision molds and dies, aerospace structural components, electronic conductive elements, and high-temperature metallurgical and chemical processing equipment. As a reinforcement phase in advanced composites or as a near-net-shape structural component, it delivers 5–8× extended service life compared to conventional metallic bars. All batches undergo rigorous quality control per ISO-certified manufacturing protocols and are accompanied by comprehensive material test reports verifying composition, microstructure, mechanical properties, and dimensional conformity. Products are vacuum-packaged to ensure integrity during transit.
Send product request
Other supplier products
 |
Titanium carbide alloy rods for efficient processing materials | Compared with traditional high-speed steel bars, the cutting speed of carbide titanium round bars can be increased by 3-5 times, significantly redu... |
 |
High-strength titanium carbide rods - for ceramic processing | The manufacturing process of this round bar is highly stringent, encompassing rigorous control over the purity of titanium carbide powder (purity &... |
 |
Titanium carbide powder with strong antioxidant performance | 该粉末表面改性后，能与树脂、塑料等有机材料良好结合，形成兼具硬度和韧性的金属陶瓷复合材料，广泛应用于高尔夫球头等体育用品，在保证强度的同时减轻了重量。该粉末磁导率较低，适用于制作高频电磁屏蔽材料，可有效降低5G通讯设备中的电磁干扰。在航空航天领域，可用于制备轻量化、高强度的结构件，减轻飞机重量... |
 |
High-precision titanium carbide hard guide wheels | Hard alloy titanium carbide guide wheels are key guiding components in the production of wire and tube materials. They are made by powder metallurg... |
 |
Coating raw material for wear resistance and corrosion resistance | The preparation methods of this powder mainly include the electric arc furnace method and the carbon thermal reduction method. Among them, the powd... |
