Ultrafine chromium carbide micro-powder
This chromium carbide powder is black in color, with a particle size of 5-25μm, a purity of over 99%, and extremely low impurity content. The particles have good dispersibility and are easy to mix with the metal matrix. After powder metallurgy sintering, highly wear-resistant parts can be produced. It is applicable to precision bearings, micro gears and other precision instrument components, which can reduce wear and improve the operational accuracy and stability of equipment. Chromium carbide powder can be compounded with other wear-resistant material powders (such as tungsten carbide and molybdenum disulfide) to form a composite coating, which features both high wear resistance and self-lubrication, with a friction coefficient as low as 0.05. It is suitable for working conditions without lubrication or where lubrication is difficult. On the surface of the drying cylinder of papermaking machinery, this composite coating can reduce the frictional damage to the paper, prevent the paper from sticking together, and improve production efficiency. The particle size of the powder is uniform, with a particle size distribution deviation of less than 10%, which can ensure the uniformity of the microstructure of the coating and avoid performance defects.
Other supplier products
|
|
Titanium carbide hard alloy guide wheel - transmission |
The installation holes of the guide wheel have high precision, and the fit clearance with the shaft can be controlled within 0.005-0.01mm, ensuring... |
|
|
High molding precision titanium carbide powder |
Titanium carbide powder is a kind of gray-black ultra-fine powder, the purity can be up to 99.9% or more, the average particle size between 0.5-5... |
|
|
Wear-resistant titanium carbide rods - Extended service life |
The length of this round bar can be customized according to specific requirements, ranging from 100 mm to 1000 mm. It is suitable for secondary pro... |
|
|
Titanium carbide guide wheels suitable for processing complex cross-sections |
The installation holes of the guide wheel have high precision, and the fit clearance with the shaft can be controlled within 0.005-0.01mm, ensuring... |
|
|
Chromium carbide powder for metallurgical wear-resistant parts |
This chromium carbide powder is black in color, with a particle size of 5-25μm, a purity of over 99%, and extremely low impurity content. The pa... |
All supplier products
Same products
