High-precision titanium carbide hard guide wheels
Hard alloy titanium carbide guide wheels are key guiding components in the production of wire and tube materials. They are made by powder metallurgy sintering of high-purity titanium carbide and cobalt binder phases, with a surface hardness as high as HRC88 and wear resistance more than 50 times that of steel guide wheels. The roundness error is controlled within 0.002mm to ensure smooth operation of the wire during high-speed drawing (up to 100m/s), avoiding jitter or offset. In the production of stainless steel wire, the use of this guide wheel can reduce the surface roughness of the steel wire from Ra1.6μm to Ra0.4μm, significantly improving product quality. Compared with ceramic guide wheels, this type of guide wheel has better toughness and is less likely to break due to minor collisions, reducing the frequency of replacement. Its service life is 2 to 3 times that of ceramic guide wheels. In the production of steel cord, a set of guide wheels can produce over 1,000 tons of cord, while ceramic guide wheels can only produce 300 to 500 tons. The cost-performance advantage of guide wheels has enabled them to be widely used in the tire industry, helping to enhance the wear resistance and safety of tires.
Send product request
Other supplier products
 |
Titanium carbide powder with hardness increased to HRC90 | Titanium carbide powder has high sintering activity and can be sintered densely at 1300-1500℃, which is 200-300℃ lower than the sintering temperatu... |
 |
Titanium carbide guide wheels with smooth operation and low vibration | Hard alloy titanium carbide guide wheels exhibit excellent impact resistance. They are less likely to crack or deform when the wire is suddenly ten... |
 |
Titanium carbide hard rods are in stock and dispatched directly | Titanium carbide (TiC)-based cemented carbide round rods offer tunable mechanical properties through precise control of TiC content (typically 70&n... |
 |
Impact-resistant and scratch-resistant introductory guide rollers | For the rolling mill, guide rollers (also called ring rollers, guide wheel) is an indispensable part of wires export in the wires rolling process, ... |
 |
Customized chromium carbide powder | 碳化铬粉末可与其他耐磨材料粉末（如碳化钨、二硫化钼等）混合，形成复合涂层，兼具高耐磨性和自润滑性，摩擦系数低至0.05，适用于无润滑或难润滑工况。在造纸机械烘缸表面，该复合涂层可减少纸张摩擦损伤，防止粘纸，提高生产效率。粉末粒径均匀，粒度分布偏差小于10%，确保涂层微观结构一致，避免性能缺... |
