Titanium carbide guide wheel - for industrial use
Hard alloy titanium carbide guide wheels are key guiding components in the production of wire and tube materials. They are made by powder metallurgy sintering of high-purity titanium carbide and cobalt binder phases, with a surface hardness as high as HRC88 and wear resistance more than 50 times that of steel guide wheels. The roundness error is controlled within 0.002mm to ensure smooth operation of the wire during high-speed drawing (up to 100m/s), avoiding jitter or offset. In the production of stainless steel wire, the use of this guide wheel can reduce the surface roughness of the steel wire from Ra1.6μm to Ra0.4μm, significantly improving product quality. Compared with ceramic guide wheels, this type of guide wheel has better toughness and is less likely to break due to minor collisions, reducing the frequency of replacement. Its service life is 2 to 3 times that of ceramic guide wheels. In the production of steel cord, a set of guide wheels can produce over 1,000 tons of cord, while ceramic guide wheels can only produce 300 to 500 tons. The cost-performance advantage of guide wheels has enabled them to be widely used in the tire industry, helping to enhance the wear resistance and safety of tires.
Send product request
Other supplier products
 |
Energy saving 30% + titanium carbide guide wheel | Titanium carbide guide wheel is made of high hardness titanium carbide material, with excellent wear resistance, high temperature resistance and ... |
 |
Titanium carbide powder with low impurity content | Titanium carbide powder has excellent chemical stability, insoluble in water, hydrochloric acid, sulphuric acid and other common acids and alkali... |
 |
Wear-resistant titanium carbide rods - special for mechanical parts | The length of this round bar can be customized according to requirements, ranging from 100mm to 1000mm, and it can undergo secondary processing suc... |
|
|
Titanium carbide guide wheel - for industrial use | Hard alloy titanium carbide guide wheels are key guiding components in the production of wire and tube materials. They are made by powder metallurg... |
 |
Wear-resistant and corrosion-resistant titanium carbide round bars | Titanium carbide alloy round bar is a high-performance material product made of titanium carbide as the base, by adding metals, ceramics and other ... |
