Titanium carbide guide wheels for industrial use
The working temperature range of hard alloy titanium carbide guide wheels is wide, and their performance is stable in an environment from -100℃ to 600℃. They can be used normally in both low-temperature frozen pipe production and high-temperature hot rolling processes. The hub and flange of the guide wheel adopt an integrated design, avoiding the problem of detachment caused by welding or bonding, and the service life can reach more than 100,000 hours. In the cable industry, it can precisely control the concentricity of the cable insulation layer, keeping the deviation within 0.05mm and ensuring the electrical performance of the cable. Compared with ceramic guide wheels, this type of guide wheel has better toughness and is less likely to break due to minor collisions, reducing the frequency of replacement. Its service life is 2 to 3 times that of ceramic guide wheels. In the production of steel cord, a set of guide wheels can produce over 1,000 tons of cord, while ceramic guide wheels can only produce 300 to 500 tons. The cost-performance advantage of guide wheels has enabled them to be widely used in the tire industry, helping to enhance the wear resistance and safety of tires.
Send product request
Other supplier products
 |
Mirror Grinding Finish Titanium Carbide Round Rods | Titanium carbide alloy rods are alloy rods with titanium carbide as the main component, combining high hardness, wear-resistant properties, good hi... |
 |
Titanium carbide guide wheel - wear-resistant | The installation holes of the guide wheel have high precision, and the fit clearance with the shaft can be controlled within 0.005-0.01mm, ensuring... |
 |
Titanium carbide hard rods - for mechanical seals | The production process of this round bar is extremely strict, from the purity control of titanium carbide powder (purity ≥99.5%) to the precise ... |
 |
Carbide round rods for precision instruments | 该圆棒的生产工艺极其严谨，从碳化钛粉末纯度的控制（纯度≥99.5%）到烧结温度的精确调控（约1500℃），每一个环节都影响着最终的性能。成品尺寸稳定性极佳，在-50℃至300℃的温度变化下，热膨胀系数仅为6×10-⁶/℃，远低于金属材料，确保了精密工具在不同环境下的精度。... |
 |
Chromium carbide powder that facilitates green surface treatment and the development of new materials | Chromium carbide powder is often irregular grayish-black particles with a particle size of 10-40μm, a purity of ≥98%, and a free carbon conte... |
