Industrial titanium carbide alloy drive wheels
This guide wheel can be customized with various slot shapes according to the specifications of wire or pipe materials, such as V-shaped, U-shaped, semi-circular, etc., to meet different production requirements. After its surface is polished, the roughness is as low as Ra0.01μm, which can reduce the friction damage to the wire and increase the tensile strength of the metal wire by 10%. In the production of automotive brake lines, the stable guidance of the guide wheel can ensure uniform tension of the brake lines and avoid potential breakage hazards during use. The dynamic balance accuracy of the guide wheel reaches G0.4 level, and the vibration amplitude during high-speed rotation is less than 0.01mm, which can reduce the vibration noise of the equipment and improve the working environment in the workshop. Its chemical stability is good, and it will not undergo chemical reactions with metal wire materials, avoiding contamination or discoloration on the surface of the wire. In the production of precious metal wires (such as gold wire and silver wire), the clean surface of the guide wheel can prevent the loss of precious metals and reduce production costs.
Send product request
Other supplier products
 |
Wear-resistant titanium carbide rods - Extended service life | The length of this round bar can be customized according to specific requirements, ranging from 100 mm to 1000 mm. It is suitable for secondary pro... |
 |
Titanium carbide hard alloy guide wheel - high hardness | Hard alloy titanium carbide guide wheels are key guiding components in the production of wire and tube materials. They are made by powder metallurg... |
 |
Custom-length titanium carbide hard alloy rods | The anti-adhesion performance of titanium carbide round rods made of hard alloy is outstanding. When processing sticky materials such as aluminum a... |
 |
Reduce production costs of titanium carbide powder | Titanium carbide powder has high sintering activity and can be sintered densely at 1300-1500℃, which is 200-300℃ lower than the sintering temperatu... |
 |
Titanium carbide guide wheels for industrial transmission | This type of guide wheel can be customized with various groove profiles—such as V-shaped, U-shaped, and semi-circular—based on the spec... |
