Cold Forming Aluminium Foil
Structures : OP (Protective layer) / Print Layer/ AL(Aluminum layer)/VC(agglutinate layer)
Specification: Width≤600mm, Thickness: 0.02mm—0.03mm
Inner hole diameter 76mm, length/roll:1000m (according to different requirement).
Functions: High obstruction, Heat insulation, Air tightness, Printable, Breakable in slightly.
Characters: Our goods are well sealed for barely pinholes, coating is average with heat insulation, and print is clear and beautiful with shining.
Cold Forming Aluminium FoilStructure: OPA 25 + Al 50 + PVC 60
1.Specification
Aluminium foil, soft Dull side lacuquer laminated to the OPA film,
Bright side lacquer laminated to PVC film
2. Structure (from outside to inside)
OPA film micron 25 ±10%
Adhesive g/㎡ 5 ±8%
Alu foil micron 50 ±10%
Adhesive g/㎡ 5 ±8%
PVC film micron 60 ±10%
Total thickness micron 145 ±10%
Total weight g/㎡ 250 ±10%
3. Aluminium Alloy: 8021 –soft
4. Physical property
Appearance
Flat, even and clean. No perforation, peculiar odor,impurity,conglutination,No obuious abnormality(separation, damage air bubble,wrinkle,dirt)between the layers.
Quantity of penetrated steam ≦0.5g/(㎡.24h)
Quantity of penetrated oxygen ≦0.5cm3/(m2.24h.0.1Mpa)
Tear strength
OPA/AL≥8.0N/15mm
AL/PVC≥7.0N/15mm
Sealing strength ≥8.0N/15mm
5. Clearance Certificate
ISO9001:2008 and ISO14000 certified company
workshops are “clean-rooms” conform to 100K class by GMP standard.
6. Recommendations as to store Conditions
Max.12 Months at: Temperature 15-35℃ and Relative Humidity;30-70%
Applications: it can be applied to blister packing for torches, pills, suppositories and mini-foods/candies, chocolate, chutty and so on.
Other supplier products
|
Spiral cap-III for Effervescent tablet |
Outer diameter:34mm
Suitable for 27mm tube
Desiccant: Silicon gel & big molecular sieve
MOQ:10000 pieces
Application: Keep products from moistu... |
|
Effervescent tablet tube-II |
2、 Effervescent tablet tube-II
1) Material: PP
2) Length:60mm,84mm,99mm and 140mm
3) Size: 27mm(inner diameter)
4) Application: Effervescent ta... |
|
PTP aluminum foil |
Structures : OP (Protective layer) / Print Layer/ AL(Aluminum layer)/VC(agglutinate layer)
Specification: Width≤600mm, Thickness: 0.02mm—0.0... |
|
Cold Forming Aluminium Foil |
Structures : OP (Protective layer) / Print Layer/ AL(Aluminum layer)/VC(agglutinate layer)
Specification: Width≤600mm, Thickness: 0.02mm—0.0... |
All supplier products
Same products