MTHPA WNY1001
Our company produces a new type of liquid organic acid anhydride epoxy resin curing agent with excellent performance Methyl tetrahydrophthalic anhydride (MTHPA, MeTHPA). Because the anhydride curing agents for epoxy resinshavebetter heat resistance and chemical stability than the amine curing agent, and can maintain excellent physical and electrical properties at higher temperatures. In recent years, anhydride hardenerhas been insulated with the motor, electronics and electrical industries. The continuous improvement of structural reliability requirements has led to the rapid development of the application of such curing agents. The specific introduction of our MTHPA product WNY-1001 is below:
Chemical Name: Methyl tetrahydrophthalic anhydride (MTHPA, MeTHPA)
Specification: WNY-1001
Molecular formula: C9H10O3
Molecular weight: 166.178
CAS No.: 26590-20-5 11070-44-3
EC：247-830-1
PHYSICAL AND CHEMICAL PROPERTIES:
-High purity and light color: The color of epoxy resin products is light yellow, which can be directly produced or produced into various colors required.
-Low viscosity: Good processing properties for casting, potting, winding, bonding, lamination, impregnation, molding and dipping. A large amount of filler can be added during casting to make the cured product excellent in performance.
-Stable performance, low solidifying point, long application period: long-term storage at room temperature.
-Low toxicity: Toxicity is only one-twentieth to one-fortyth of the amine curing agent.
-Low volatility: Sealed preservation.
-Low heating loss.
-Good mutual solubility: This product can be miscible with all epoxy resins, the mixing viscosity is low, and the shrinkage rate of the system is small when heated and cured.
-Application: More suitable for white encapsulation.
TECHNICAL DATA SHEET:
|
Item |
WNY1002 |
WNY1001 |
WNY1008 |
|
Appearance |
light yellow transparent liquid, no mechanical impurities. |
||
|
Color(Pt-Co) |
300#Max |
200#Max |
|
|
Density (g/cm3, 20℃) |
|||
|
FreezingPoint(℃) |
-15Max |
0Max |
|
|
Viscosity (Pa.s, 25℃) |
|||
|
Acid Value(mgKOH/g) |
660-685 |
||
|
Anhydridecontent |
|||
|
Volatile content(120℃) |
|||
|
Free acid |
|||
* Above are standard grades, anhydride mixtures and different isomer structures can be offered.(Mixture of 3- and 4- Isomers)
As a one of the most professional epoxy resin and hardener manufacturers, WSX Chemicalcovers an area of 4 acres with more than 60 employees. We have four advanced production lines and our annual production capacity is 30000 tons, is the largest manufacturer of MTHPA products in China. We sincerely invite and welcome people from all around the world to invest and create more values together.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
MTHPA | Our company produces a new type of liquid organic resin acid anhydride curing agentwith excellent performance Methyl tetrahydrophthalic anhydride (... |
 |
MTHPA | OVERVIEW Methyl tetrahydrophthalic anhydride (MTHPA, MeTHPA) is a new type of liquid organic acid anhydride epoxy resin curing agent with excellent... |
 |
MTHPA | Are you looking for epoxy glue? Methyl tetrahydrophthalic anhydride (MTHPA, MeTHPA) is a high performance product of anhydride epoxy curing agent... |
 |
MTHPA | OVERVIEW Methyl tetrahydrophthalic anhydride (MTHPA, MeTHPA) is a new type of liquid organic acid anhydride epoxy resin curing agent with excellent... |
 |
Basic Information and Properties of MTHPA | Methyl tetrahydrophthalic anhydrideis a chemical with a molecular formula of C9H10O3. First, basic information. Name: Methyl Tetrahydrophthalic An... |
