ADSS Fiber Optic Cable

Fiber Optic ADSS Cable is known as an all-dielectric self-supporting optical cable. Self-supporting ensures that the ADSS outdoor fiber cablehas sufficient mechanical strength. The ADSS fiber cable applies all-dielectric material to withstand the impact of strong electricity in a high voltage and strong current environment. As one of the most professional ADSS cable suppliers and manufacturers, TUOLIMA can customize the self-supporting fiber optic cable ADSS according to your requirements. If you need any technical support, we will also recommend the most suitable and cost-effective customized ADSS OFC cable for you according to the different application environments, laying methods, and customer requirements. Our all-dielectric self-supporting cables can be applied in many areas, for example, the aerial industry. You can check ADSS fiber specsbelow. If you have any questions, please feel free to contact us.

Specification of ADSS Fiber Optic Cable

Mechanical characteristic and test method
Tensile strength	conform to IEEEC standard P
Crush	conform to IEC 794-1-E3
Impact	conform to IEC 794-1-E4
Repeated bending	conform to IEC 794-1-E6
Torsion	conform to IEC 794-1-E7
Flexing	conform to IEC 794-1-E8
Cable bend	conform to IEC 794-1-E11
Water penetration	conform to IEC 794-1-F5B
Color coding	conform to EIA/TIA 598
Temperature requirement	operation: Installation	- 40 C~ +60 C - 10 C ~ +60 C
	storage/transportation	- 40 C ~ +60 C
Temperature cycling test	conform to IEC 794-1-F1
Bending Radius	unloaded	15 times of outer diameter
	loaded	25 times of outer diameter

Characteristics of ADSS Fiber Optic Cable

Fiber Material	G652D
Mode field diameter (1310nm):
Mode field diameter (1550nm):
Cladding diameter:	125um±1.0um
Cut off wavelength of cabled fiber (ℷcc):	≤1260nm
Attenuation at 1310nm:	≤0.36dB/km
Attenuation at 1550nm:	≤0.22dB/km
Bending loss at 1550nm (100 turns, 30mm radius):	≤0.05dB
Dispersion in the range 1288 to 1339nm:	≤3.5ps/(nm•km)
Dispersion at 1550nm:	≤18ps/(nm•km)
Dispersion slope at zero dispersion wavelength:	≤0.092ps/(nm2•km)

Details of ADSS Fiber Optic Cable

SN	Item	Unit	Value
1		count	12~288
2	Number of fibers per tube(max)	count	4
3	Number of elements	count	6
4	Cable diameter	mm
5	Cable weight	kg/km	121
6	Max allowed operating tension	N	5000
7	Short term crush	N/100mm	2200
8	Max span with 1.0% installation sag	m	100

Drawing of ADSS Fiber Optic Cable

Advantages of ADSS Fiber Optic Cable

Uninterruptible power supply erection

Adopt PE/AT sheath, excellent resistance to erosion

Small cable diameter and lightweight help reduce the impact of ice, wind, and load on towers

Large span, maximum span ≥ 1000 meters

Great tensile strength and high/low temperature resistance

Service life is expected over 30 years

Packing and Comments of ADSS Fiber Optic Cable

Packing material: Non-returnable wooden drum.

Both ends of the outdoor optical cable are securely fastened to the drum and sealed with a shrinkable cap to prevent ingress of moisture.

Cable printing: The sequential number of the cable length shall be marked on the outer sheath of the cable at an interval of 1meter ± 1%.

The following information shall be marked on the outer sheath of the cable at an interval of about 1 meter.

Drum marking: Each side of every wooden drum shall be permanently marked in a minimum of 2.5~3 cm high lettering with the following:

ADSS Fiber Optic Cable Installation

Basically, the installation of ADSS optic cable is divided into two steps:

Step 1: Lay, arrange, and tighten the dielectric fiber optic cable and then install cable fittings and bridge molding.

Step 2: Fiber optic connection and characteristic test of the optic fiber.

The tips of ADSS fiber optic cable installation:

The straight-line distance from the tower to the cable laying equipment shall be greater than 4 times the height of the pulley suspension point to reduce the side pressure on the optic cable. Excessive tension shall not be used to pull the optic cable during cable laying, and the traction force shall not be greater than half of the initial tension borne by the optic cable. The traction speed of the optic cable is generally not greater than 20m/min.

Другие товары поставщика

	TLM5002A Tool Clean Kits	The 5002A Deluxe Fiber Optic Cleaning Kits are solutions for fiber construction and daily cleaning and maintenance. Fiber optic kit tools for cl...
	Fiber Optic Terminal Box	Optical termination box (OTB), is a compact fiber management box used for FTTH application. Fiber optic cable terminal boxincludes faceplate and dr...
	GYXTW Fiber Optic Cable	Fiber Optic GYXTW cableis to sheath 250μm optical fiber into a loose tube which is filled with waterproof compound. Water blocking material is a...
	TPX-F Rack Cabinet	Optical fiber distribution frame GPX-K rack mount cabinetis made of top quality steel alloy and treated with galvanizing, oxidation and electrostat...
	0.9mm Fiber Optic Pigtail	The drop cable pigtailis a fiber optic cable terminated with a factory installed connector at one end, leaving the other end terminated. Therefo...

Все товары поставщика

Похожие товары

	ETH Ethereum Jasminer X4 BRICK ASIC Miner	Продавец: Shenzhen Dovina Electronic Co.,Ltd	Jasminer X4 Brick Review Jasminer x4 brick for salefrom Jasminer mining EtHash algorithm with a ...
	ETH Ethereum Jasminer X4-1U ASIC Miner	Продавец: Shenzhen Dovina Electronic Co.,Ltd	TheJasminerx4-u1 miner has a different look than the X4 mining unit. So you get a miner with a sl...
	ETH Ethereum Jasminer X16 ASIC Miner	Продавец: Shenzhen Dovina Electronic Co.,Ltd	Model X16Qfrom Jasminer mining EtHash algorithm with a maximum hashrate of 1.845Gh/s for a power ...
	ETH Ethereum iPollo V1 Mini SE Plus ASIC Miner	Продавец: Shenzhen Dovina Electronic Co.,Ltd	Model V1 Mini SE Plusfrom iPollo mining EtHash algorithm with a maximum hashrate of 400Mh/s for a...
	ETH Ethereum iPollo V1 Mini SE ASIC Miner	Продавец: Shenzhen Dovina Electronic Co.,Ltd	Model V1 Mini SEfrom iPollo mining EtHash algorithm with a maximum hashrate of 200Mh/s for a powe...