Tooth composite resin wear tester

• 

Applicable standards:

YY/T 0113-2015 "Dental composite resin wear performance test method" : This standard specifies the test method of dental composite resin wear performance in detail, including the requirements of test equipment, test conditions, test steps and data processing. The design, manufacture and use of the tooth composite resin wear tester should strictly follow this standard to ensure the accuracy and reliability of the test results.

Main parameters:

Control system:

PLC （Programmable logic controller） control is used to realize the automatic control of the equipment.

Operation interface:

It is equipped with a color 7-inch touch screen and supports switching between Chinese and English for easy operation.

Wear movement mode:

The sample is moving in a circle with uniform speed and constant radius relative to the grinding part, and at the same time, it is moving in a vertical direction in an intermittent way.

The friction period is usually a 30 degree Angle.

The circular motion radius of the sample is 27.5mm.

The linear velocity at the center of the sample is 75mm/s.

Wear load:

Two loads, 22N and 172N, are included to simulate wear under different conditions.

Built-in balance:

It is equipped with an analytical balance with an accuracy of 0.0001g for the precise measurement of specimen wear.

Accessory:

For grinding: special rubber plate, the number is usually 20 pieces, diameter （100±1） mm, thickness （6±0.2） mm, Shore hardness 75±5HA.

Abrasive: In line with YB/T 5217-2005, grade FC-98, particle size 110 mesh ——120 mesh of fluorite concentrate, weight is usually 5kg.

Hair dryer: With a power of about 50W, it is used to clean abrasives and debris during the test.

Ultrasonic cleaning machine: the power is 400W, used for cleaning samples and grinding parts.

Sample mold: can prepare the diameter of （10±0.1） mm, high （6±0.5） mm sample mold, made of stainless steel material, easy to disassemble the sample.

Special fixture: used to fix the sample and the matching parts to ensure stability and accuracy during the test.

Другие товары поставщика

	AC/DC Current - Carrying Temperature - Rise and Voltage - Drop Test System for Automotive Wires	Application Scope of the AC/DC Current - Carrying Temperature - Rise and Voltage - Drop Test System for Automotive Wires: 1. Record the temperatur...
	Tooth torsion yield tester	Applicable standards: YY/T 0315-2016: This standard may specifically address certain performance requirements for titanium and titanium alloy dent...
	Leather Air Permeability Tester	IntroductionA certain area of leather or textile samples is exerted a certain pressure on the air. The permeability is different, through the gas f...
	Battery needling tester	Product introduction 　　For lithium primary batteries and other primary batteries, as well as lithium ion batteries （used in mobile s, laptops, ...
	Slip Resistance Tester	TRANSLATE with x English Arabic Hebrew Polish Bulgarian Hindi Portuguese Catalan Hmong Daw Romanian ...

Похожие товары

	OPE wax used as lubricant in polymer processing	Продавец: Syntop chemical Co.,Ltd.	Oxidized polyethylene wax is a low-molecular-weight polymer containing polar carbonyl and hydroxy...
	Frameless Motor Core	Продавец: 855082	Frameless Motor Core Yuma Precision offers cutting-edge frameless motor cores, designed for indu...
	Permanent Magnet Motor Core	Продавец: 855082	Permanent Magnet Motor Core Permanent Magnet Motor Core- High-Efficiency Motor Solutions Yuma P...
	Linear Motor Core	Продавец: 855082	Linear Motor Core Yuma Precisionspecializes in manufacturing high-quality Linear Motor Coresdesi...
	China manufacturer Liquid level meter CYJ-1-150KP for power generation	Продавец: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD	"China manufacturer Liquid level meter CYJ-1-150KP for power generation The use of advanced techn...