Automatic Glue Mixing and Potting Machine for LED driver

Automatic Glue Mixing and Potting Machine for LED driver

AB glue meter mix dispensing machine/automatic glue potting machine for LED driver automatic epoxy resin potting machine 2 Part Silicone plyurethane epoxy dosing and dispenser potting machine Double Liquid ABAdhesiveDispenserEquipment AB glue meter mix dispensing machine/automatic glue potting machine for LED driver automatic epoxy resin potting machine 2 Part Silicone plyurethane epoxy potting dispensing machine AB Resins compound dosing dispensing potting system ,2K potting technology AB glue dispensing machine Epoxy dispensing machine Two-component dispensing machine，Dual-component dispensing machine Meter-mix dispensing machine，Resin dispensing machine Adhesive dispensing system，Dispensing robot with high precision Dispensing valve, AB Liquid dispenser , Automated dispensing equipment

1. It has the functions of continuous interpolation of points, lines, surfaces, arcs, circles, irregular curves and three-axis linkage, and can be adapted to glue filling of any irregular objects;

2. Ultra-large hard disk storage memory capacity, unlimited program storage, no need to reprogram, and the software has functions such as area array, translation and rotation operations;

3. The glue amount, thickness, glue coating speed, glue dispensing time, and glue stop time can all be set by parameters. The glue output is stable and there is no leakage of glue;

4. Optional CCD visual programming system to achieve fast programming;

5. The three functions of glue dispensing, glue filling and track potting are integrated and operated fully automatically;

6. Proportion as needed to achieve glue filling while mixing, maximizing glue savings;

7. Double barrel design, A glue and B glue are stored separately to ensure that the glue will not solidify if left for a long time;

8. The mixing ratio is adjustable from 1.:1 to 10:1, using static or dynamic mixing to ensure uniform and complete mixing;

9. The unique control system is not affected by air pressure factors and avoids uneven glue dispensing, wire drawing, bubbles and other phenomena;

10. A variety of glue filling modes can be freely switched. You can pour glue A, glue B, or glue AB individually. You can also manually fill glue A, glue B, or glue AB. If you have special requirements, you can use multi-stage quantitative filling. The glue mode can perform up to five stages of quantitative glue filling (the glue output and speed of each stage can be set separately)

11. Equipped with automatic feeding and suction functions to save manual feeding time and improve work efficiency;

12. The storage barrel is equipped with a liquid level sensor switch, which automatically alarms when the material is insufficient or full, and automatically shuts down for protection when the material is insufficient.

13. Equipped with glue stirring, optional heating and reserved vacuum degassing function, it is suitable for different types of filling processes.

14. Equipped with output counting, single piece timing and operation monitoring and alarm functions

15. The AB pump pulse coefficient setting wizard function is convenient for adapting to different types of glue from different manufacturers.

16. Reserved for stuck pump detection and flow monitoring functions. Optional for customers with high glue ratio and small error range

17. Intelligent automatic cleaning function, multiple modes of automatic cleaning to adapt to different environments.

18. The anti-curing procedure prevents the equipment from suspending glue filling and the glue hardening to block pipes and valve bodies.

19. Cleaning agent recycling system can improve cleaning agent utilization and effectively reduce waste.

20. The unique glue anti-curing mode can effectively prevent the mixing head from curing due to employee negligence.