Wire Rope Pressing Machine
The wire rope pressing machine is a relatively common and best-selling wire rope rigging processing equipment in the world.
The steel wire rope press machine adopts the processing with no-cutting and plasticity method to let the aluminum sleeve fully fill in the mold cavity and tighten well of the steel wire rope without destroying wire sling parts strength. The cold working process of the pressing process reduces the damage to the wire rope.The rope slings made by the pressing machines have advantages including high binding strength, beautiful appearance, strong corrosion resistance,material saving and accuracy length. The strength of the pressed wire rope slings are fully in line with international standards. The main models of wire rope pressing machines we currently produced are capacity of 125, 350, 600, 1000, 1500, 3000, 5000 and so on..
How To Operate And Maintenance
1. Different specifications wire ropes can be pressed by different molds.
All molds are made of high-quality steelt is processed under high temperature,cooling, tempering and other processes, thenfinished product with strong and durable properties come into being.
2.The hydraulic system is a dual-controlled, overflow valve regulating and magnetic pressure gauge obtained set which can
precisely control the pressure.Our 200-ton press can press ropes diameter from 6-22 mm.And warranties vary from 3 months to 2years for different fittings and main body.
3. Machine operation
* lnject the hydraulic oilfrom the air filter to the center line of the liquid level gauge before use.The filtration accuracy of theinjected hydraulic oil is less than or equal to 15um.
*Adjust the upper limit of the pressure gauge to 32Mpa, and the lower limit pointer to zero.
*After adjusting the pressure gauge,turn on the power, then observe whether the motor turns correctly. When the motor runs wellget the pump work for 5 minutes with no load. Then step on the left switch of the foot pedal, the pressure starts to increase andshould reach 32Mpa.lf the pressure is low, adjust the relief valve nut.Turn the nut clockwise to increase the system pressure, andcounterclockwise to decrease. When the system pressure reaches the rated working pressure of 32Mpa,operator should lock thenut. Observe whether the pump run normally, and check if each joint is leaking oil, also inspect the control switch is flexible andreliable or not. Solve problems in time when it comes out.
Please note:
*The overflow has been adjusted in the factory. the user shouldn't adjust it at will. f a large noise is found during the operation ofthe pumping station,i is caused by a large amount of air in the hydraulic system at the early stage of operation.ltis recommendedto make the piston run upper and lower several times to discharge the air, and the noise will be reduced.
*Select the corresponding consolidation tube, mold and pressure value per different pressing rope diameters.*Cover the steel wire rope with consolidation tube, and the end of the wire rope end must expose about Dia0.5-1.0.*Apply lubricating fluid to the cavity.
As one of lifting equipment manufacturers, we can offer sorts of lifting chainfor sale, if you have needs, please contact us.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Wire Rope Sling Parts Components | Wire rope components, wire rope parts, wire rope assemblies are the most used products both in the industrial field and civil field. From custom st... |
 |
Marine Anchor | Anchor is the main part of the anchoring equipment, its an iron ship-stopping device, which is connected to the ship with an iron chain. It can sta... |
 |
Chain Hooks | TITANSUHE has a huge range of chain hoist hookfor Rigging and Tie Down. All our chain hooksare made of alloy steel with heat treatment for high str... |
 |
Elevator Spare Parts | As one of the professional elevator spare parts suppliers china/lift spare parts suppliers and manufacturers in China, TITANSUHE provides custom el... |
 |
Lifting Loop with Socket | This wire lifting loopsare can be used to connect lifting hoists to assist service users in safe lifting or repositioning. Lifting loophelp lift mo... |
Похожие товары
 |
Custom Rubber Badge | Продавец: Nanjing Jiamei Garment Accessory Factory | Custom Rubber Badge Durability, style and practicality are found in custom . Customize it wi... |
 |
injector nozzle for diesel engines | Продавец: China Lutong Part Plant | China Lutong Parts Plant manufactures fuel Injection including EFI (Electronic Fuel Injection), C... |
 |
Diesel Injector Nozzles | Продавец: China Lutong Part Plant | At China-lutong we work for your satisfaction and have a liberal 30 day return policy. We create ... |
 |
nozzle manufacturing companies | Продавец: China Lutong Part Plant | This is China Lutong Part Plant. We manufacture and offer kinds of OEM diesel fuel injection part... |
 |
diesel injector nozzle assembly | Продавец: China Lutong Part Plant | China Lutong Parts Plant,a company that manufacture and supply common rail injector;common rail d... |
