PTFE Extruded Tube
PTFE Extruded Tube
Polytetrafluoroethylene extrusion tube process.
mixing: through the mixing machine to polytetrafluoroethylene powder and extruder mix.
storage: storage at 25℃ for 24 hours.
extrusion molding: extrusion molding through the extruder.
sintering: the product into the sintering furnace for sintering.
cooling: after sintering cooling.
The polytetrafluoroethylene pipe produced by extrusion process solves the problem of poor shrinkage of polytetrafluoroethylene pipe under heat, which can not effectively improve the corrosion resistance, electrical insulation and anti-viscosity of the workpiece.
Specification of theExtruded PTFETube
|
Product name |
Speciations(mm) |
Remarks |
||
|
Diameter |
Length |
|||
|
PTFE pipe |
Molded tube |
Outer: 20-600 |
100-250 |
|
|
Hydraulic tube |
Outer: 50-300 |
500-1000 |
Diameter needs machine processing |
|
|
Extruded tube |
Outer: 30-200 |
<2000 |
the length can be customized as customer's requirement |
|
The Technical Indexes of the PTFE Extruded Tube
|
Properties |
The implementation of standards |
The technical performance index |
Remarks |
||
|
The proportion of |
Tensile strength(Mpa) |
Crack elongation(%) |
|||
|
Molded rods |
ZBG33003 SFB-1 |
≥14 |
≥140 |
QB/T 3626-1999 Light industry standard |
|
|
Molded pipe |
Company standard |
≥15 |
≥150 |
||
|
Hydraulic rod/tube |
Company standard |
≥14 |
≥150 |
||
|
Extrusion rods/tube |
Company standard |
≥15 |
≥150 |
||
Usage of Extruded PTFETubing
Mixing: through the mixing machine to polytetrafluoroethylene powder and extruder mix.
Storage: storage at 25℃ for 24 hours.
Extrusion molding: extrusion molding through the extruder.
Sintering: the product into the sintering furnace for sintering.
Cooling: after sintering cooling.
The polytetrafluoroethylene pipe produced by extrusion process solves the problem of poor shrinkage of polytetrafluoroethylene pipe under heat, which can not effectively improve the corrosion resistance, electrical insulation and anti-viscosity of the workpiece.
If you want to know more kinds of plastic industrial products, please visit our website.
As a ptfe product supplier, we will do our best to meet all the needs of customers.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
PTFE Gasket | PTFE Gasket A pure ptfe gasketis a type of sealing component made from PTFE material, which is a synthetic fluoropolymer known for its excellent... |
 |
PTFE Gasket | A purePTFE gasketis a type of sealing component made from PTFE material, which is a synthetic fluoropolymer known for its excellent chemical resist... |
 |
PTFE Slide Bearing Plate | PTFE slide bearing platesare made of PTFE suspended fine powder resin, cold pressed into billet, sintering forming, pressing grease groove, machine... |
 |
UHMWPE Molded Sheet | UHMWPE Molded Sheet Molded UHMWPEsheets find extensive use in a wide range of industries, including automotive, food processing, packaging, marine... |
 |
PTFE Slide Bearing Plate | PTFE Slide Bearing Plates The product is made of PTFE suspended fine powder resin, cold pressed into billet, sintering forming, pressing grease gr... |
Похожие товары
 |
Two-Shot Injection Molds | Продавец: WIT MOLD LIMITED | Two-Shot Injection Molds Advantages of two-shot injection molding The benefits of Double Inject... |
 |
precision injection molding | Продавец: WIT MOLD LIMITED | precision injection molding Precision injection moldingis a method demanding unparalleled accura... |
 |
Custom Plastic Molds molding | Продавец: WIT MOLD LIMITED | Custom Plastic Molds molding Plastic Molds molding servicesprovide many extremely versatile part... |
 |
Negative Pressure Physiotherapy Tank Molds | Продавец: Zhuozhou Yihua Mould Factory | The negative pressure tank is a disposable consumable for male negative pressure treatment. This ... |
 |
PLC Casing Molds | Продавец: Zhuozhou Yihua Mould Factory | The PLC housingbelongs to a kind of rail electrical module. It not only needs to achieve the fit ... |
