.

Single Stage Cold Coal Gas Gasifier

 Single stage cold gas stationTechnological processThe air blower of drum boiler water clip 0.26mpa set of self-produced steam by the control valve,Website:, setting the ratio of mixed regulation merged into saturated air (gasifying agent) in air and gas generator, through the check valve into the furnace. In the furnace after the gas occurs at the bottom of the furnace grate uniform wind, inverse to the downward movement of hot ash heating into fire gasification layer (1000-1200 ℃) and hot carbon gasification reaction, heat of formation crude gas to new furnace coal drying and coalbed methane deoxidation system export derived from, the exit gas temperature at 500-600 ℃, the main components for CO, H2, CO2 and N2. Where CO and H2 are the active components of the gas, which belong to the heating gas, N2 is the air component of the gasification agent. Gasifier bed height is 1.3m ~ 1.8m, from top to bottom can be divided into ash layer, gasification layer, reaction layer, dry distillation layer. Into the furnace of coal after crushing, screening, size 13 ~ 25mm, 25 to 50, or 40 ~ 60mm, from coal lifting device added to the top of the furnace coal bunker, bunker in raw coal through coal feeding device for the coal distributor into the furnace.Purification treatmentBy the gas occurrence furnace production of crude and hot gas (temperature of 500 to 600 ℃) into the first double standpipe is thermal cycling cooling water washing, gas part of the dust with a water circulation heat from a double vertical pipe at the lower part of the seal discharge, double standpipe washing and cooling the gas temperature is about 80 ℃, entered the water sealed gas duct, divided into two respectively washing tower was again the cooling and cleaning dust, gas cooled to a temperature of 30 to 45 ℃, through gas compressor and the pressure was increased to 6 kPa (also can be adjusted according to the user re entering the drop catcher to remove the moisture from the gas and finally transmitted to the user.Single stage cold gas station process flow diagram   


Отправить запрос, связаться с поставщиком

Кому: ZiBo YiFeng Mechanical engineering co.,LTD
Ваш E-mail:
Текст письма:


Send to other suppliers

Другие товары поставщика

 Single stage cold gas stationTechnological processThe air blower of drum boiler water clip 0.26mpa set of self-produced steam by the control valve...
Single stage hot gas station Φ1.5 m ~Φ4.0 m single stage coal gasifierSINGLE—;STAGE COAL GASIFIER TECHNICAL PARAMETERspecificationparameter itemspe...
Two stages hot gas stationΦ2.0m~Φ4.5m Two stages hot gas station,Website: gas flows in high temperature,more high thermal efficiency,more less phen...
 Gas storage tank500 m3 ~ 10000 m3 series gas storage tank,Website:, Play important role in supply gas smoothly and adjust the gas consumption Gas ...
Все товары поставщика

Похожие товары

Custom Made Precision CNC Stainless Steel Turning Parts with Laser Marking
Custom Made Precision CNC Stainless Steel Turning Parts with Laser Marking Продавец: Dongguan Weimi Hardware Technology Co. Ltd. Dongguan Weimi Hardware Technology Co.,Ltd is one of the leading China turning stainless steel ma...
High USA precision parts/ turning aluminum parts/ cnc turning center parts
High USA precision parts/ turning aluminum parts/ cnc turning center parts Продавец: Dongguan Weimi Hardware Technology Co. Ltd. Dongguan Weimi Hardware Technology Co.,Ltd is one of the leading China aluminium turning parts ma...
Custom precision steel CNC milling parts
Custom precision steel CNC milling parts Продавец: Dongguan Weimi Hardware Technology Co. Ltd. Weimi Hardware Tech. Company is one of the leading China custom precision steel cnc milling parts...
High Precision CNC Turned Metal Parts for Medical Devices
High Precision CNC Turned Metal Parts for Medical Devices Продавец: Dongguan Weimi Hardware Technology Co. Ltd. Dongguan Weimi Hardware Technology Co.,Ltd is one of the leading China turned metal parts manufac...
Precision CNC turning machinery Brass Turned Parts Components
Precision CNC turning machinery Brass Turned Parts Components Продавец: Dongguan Weimi Hardware Technology Co. Ltd. Dongguan Weimi Hardware Technology Co.,Ltd is one of the leading China brass component manufactur...