Decorative powder coating series
Product Overview
This series of products includes epoxy, hybrid, polyester, polyurethane and other systems, designed to meet the needs of various complex indoor and outdoor environments.
Product Features
- Colorful or simple style, to meet diverse aesthetic needs.
- Excellent substrate defect hiding ability.
- Uniform and stable pattern shape, with excellent pattern reproducibility.
Application areas
Furniture products
Shelf system
Iron hardware
Fitness equipment
Lighting products
Security doors
Safes
Industrial equipment
Product series
Surface effect classification (both suitable for indoor and outdoor environments):
Sand effect
Wrinkle effect
Point diffusion effect
Hammer effect
Shrinkage effect
Metallic appearance effect
Technical parameters
Basic properties of powder:
Specific gravity: 1.1~1.8g/cm³
Coating properties
| Mechanical properties | Pencil hardness | GB/T6739-1996 | ≥H |
| Adhesion | GB/T9286-1998 | Grade 0 | |
| Bending | GB6742-86 | Φ3mm | |
| Impact | GB/T1732-93 | 50kg.cm | |
| Cupping | GB 9753-88 | >6mm | |
| Corrosion resistance | Salt spray resistance | GB/T1771-91 | No change in coating film after 500-1000 hours, unilateral corrosion at the cross section <2mm |
| Moisture and heat resistance | GB/T1740-79 | >1000 hours slight gloss loss, ≤Grade 1 | |
| Weather resistance | Depends on the type of powder coating | ||
| Note: The above parameters are laboratory data for reference only. The actual indicators are related to factors such as customer environment, equipment, substrate, pretreatment, and spraying process. |
|||
Application conditions
Pretreatment: Phosphating or chromizing treatment is required.
Coating method:
Suitable for corona electrostatic coating.
Artistic effect may vary depending on the process.
Baking conditions: Determined according to the type of product curing system (no specific temperature/time is provided).
Packaging
Carton packaging, lined with polyethylene plastic bags.
Net weight: 20kg/box.
Storage conditions
Environmental requirements: temperature ≤30℃, dry and ventilated, avoid direct sunlight.
Shelf life: 6 months (when the above conditions are met).
Safety and health tips
The raw materials are non-toxic, and no toxic gas is released during baking.
Operation protection:
A dust mask must be worn (avoid inhaling dust).
Reduce long-term skin contact, and the attached coating can be washed with soap.
If you're ready to take the next step or Request Free Samples, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Fluorocarbon powder | Powder coatings are also called 4E products because of their environmental protection, energy saving, safety, and economy. 1. Product type analysi... |
 |
Epoxy-Polyester Hybrid Powder Coating (Hybrid Type ) | Product Overview Epoxy-Polyester Hybrid Powder Coating (HybridType ) is a thermoset coating system that combines epoxy resin and polyester resin t... |
 |
Polyester based powder coating MT-OA010G White | Product Description MT-OA010G is a polyester based powder coating, formulated without TGIC. Powder Properties Chemical type Polyester TGI... |
 |
Metallic flat matte MT-039/98981 | Introduction No. MT-039/98981 Color Metallic gray Surface Metallic flat matte System Weather-resistant polyester ... |
 |
Metallic plane MT-629/93601 | Introduction No. MT-629/93601 Color Gray Surface Metallic plane System Resin imported from Austria Packing Speci... |
