KK01 Scratch tester

• 

Product Introduction:

With the continuous expansion of the use of plastic molding products, from the point of view of the surface appearance of molded products (creativity)， improving scratch resistance (scratch characteristics) has become an important topic. And scratch resistance is also very important from the point of view that scars formed on the surface of the molded product may reduce the strength of the product. Scratch testing is performed by horizontal movement of the scratch needle against the pattern. Scratch characteristics were previously evaluated by a "constant vertical load test", but the American Society for Materials and Testing (ASTM) and the International Organization for Standardization (ISO) standardized the "vertical load test" (ASTM D7027-05/S019252)。

Scope of application:

The tester uses a steel needle to scratch films, plastics, automotive interior and exterior decorative materials, coating materials, etc., to evaluate the material's "scratch resistance" (scratch characteristics)。

Features of scratch tester:

1. Teaching function

Use this function to set the load zone with high precision before sampling.

2. Easy to operate with touch screen

All functions can be used and configured through the touch screen installed in front of the Settings.

3. the surface has a bump can also test scratches

The Yaru drive for vertical loads uses a county frame mechanism, so that even the surface with a concave and convex pattern can be tested without affecting the linear increase in load characteristics.

4. Memorizable test conditions

Storage capacity up to 20. capable of memorizing test conditions.

Technical parameters:

The KK-02 is fully compliant with I50 and ASTM International standards

Size :W545*D455*H680(mm)

Weight: About 65KG

Test mode: Load increase mode

Speed range :1——200 mm/sec

Vertical (z) load control range :1——50N

Horizontal (x) load test range :50N

Другие товары поставщика

	Comprehensive oil filter tester	Standards: 1、Executive standard: jb/t 5088.2-2008 internal combustion engine spin-on oil filter; 2、Test object: internal combustion engine oil fi...
	Flooring VOC Emission Testing Chamber	Standard ISO 16000-9(Indoor Air - Determination of Volatile Organic Compounds) ASTM D5116(Standard Guide for Small-Scale Environmental Chamber ...
	Tibial Tray Fatigue Testing Machine	Standard YY/T 0810 (China): Specifies fatigue testing protocols for tibial trays in total knee arthroplasty, focusing on support and protection ...
	MK2 fiber impurity analyzer ITMF	Standards: ITMF Applications: It is mainly used to determine the content of non-fibrous components in synthetic fibers and 100 grams of debris, ...
	Fabric Downproof Property Tester(Friction method) BS EN 12132-1 GB/T 12705.1	Standards GB/T 12705.1-Textile - Methods of testing the down-proof properties of fabrics - GB/T14272-Down Garment requirement BS EN 12132-1 Feathe...

Похожие товары

	Scott Flex Tester	Продавец: Шанхайская компания Qianshi Precision Electromechanical Technology Co., Ltd	Product Introduction: Scott kneading tester is suitable for back and forth kneading resistance o...
	NEU nanofiber electrospinning device	Продавец: Шанхайская компания Qianshi Precision Electromechanical Technology Co., Ltd	Content The Nanofiber Electrospinning Unit uses electrospinning techniques to safely and easil...
	KK03 Scratch tester	Продавец: Шанхайская компания Qianshi Precision Electromechanical Technology Co., Ltd	Product Introduction: With the continuous expansion of the use of plastic molding products, from...
	KK02 Scratch tester	Продавец: Шанхайская компания Qianshi Precision Electromechanical Technology Co., Ltd	Product Introduction: With the continuous expansion of the use of plastic molding products, from...
	KK01 Scratch tester	Продавец: Шанхайская компания Qianshi Precision Electromechanical Technology Co., Ltd	Product Introduction: With the continuous expansion of the use of plastic molding products, from...