Methylated Urinary Aldehyde Resin
Methylated Urinary Aldehyde Resin: Properties and Applications
Table 1: Key Characteristics of Methylated Urinary Aldehyde Resin
| Property | Specification | Importance |
|---|---|---|
| Chemical Structure | Modified urea-formaldehyde polymer | Determines reactivity and stability |
| Methylation Degree | 20-40% | Affects solubility and curing properties |
| Solid Content | 60-70% | Impacts formulation viscosity |
| pH Value | 7.5-9.0 | Influences storage stability |
| Viscosity (25°C) | 200-800 cps | Critical for application methods |
| Shelf Life | 6-9 months | Requires cool, dry storage |
Table 2: Industrial Applications and Performance
| Application | Function | Benefits |
|---|---|---|
| Wood Adhesives | Plywood/particleboard binder | Fast curing, improved water resistance |
| Foundry Coatings | Sand binder | Excellent thermal stability |
| Textile Finishing | Wrinkle-resistant agent | Enhanced fabric durability |
| Paper Strengthening | Wet-end additive | Increased wet tear strength |
| Abrasive Materials | Bonding agent | Improved grit retention |
Table 3: Comparison with Conventional Urea Resins
| Parameter | Methylated Resin | Standard UF Resin |
|---|---|---|
| Formaldehyde Emission | 30-50% lower | Higher emission |
| Water Resistance | 20% improvement | Moderate resistance |
| Cure Speed | 15-20% faster | Standard curing |
| Alkali Resistance | Excellent | Poor |
| Storage Stability | 6-9 months | 3-6 months |
Table 4: Recommended Formulation Guidelines
| Component | Wood Adhesive (%) | Foundry Binder (%) | Textile Finish (%) |
|---|---|---|---|
| Resin | 55-65 | 60-70 | 40-50 |
| Catalyst | 0.5-1.5 | 1-2 | 0.3-0.8 |
| Filler | 15-25 | 10-20 | – |
| Additives | 2-5 | 3-7 | 5-10 |
| Water | Balance | Balance | Balance |
Table 5: Safety and Environmental Profile
| Parameter | Value | Compliance |
|---|---|---|
| Formaldehyde Content | <0.5% free | Meets E1 standards |
| VOC Emission | <50 g/L | CARB compliant |
| Flash Point | >100°C | Non-flammable |
| Biodegradability | 40-60% | OECD 301B |
| Toxicity (LD50) | >2000 mg/kg | Low hazard |
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Powder Coating for Electrostatic Spray Application on Cold Surfaces | Product Description MT R4-ES HJ601R is a high quality thermosetting epoxy powder coating for the corrosion protection of valves and fittings, manu... |
 |
Diacetone Alcohol CAS 123-42-2 | Introduction Products name ： Diacetone Alcohol CAS NO. ： 123-42-2 Molecular Formula： C6H12O2 Structural formula： Us... |
 |
Three proof adhesive | Three proof adhesive,also known as circuit board protective adhesive or coating adhesive, is applied to the surface of the circuit board to form a ... |
 |
Industrial formaldehyde | Introduction Formaldehyde, chemical formula or HCHO or CH2O, formula 30.03. also known as ant aldehyde, explosion limit: 7.0-73%. It has a strong ... |
 |
Isophorone (IPHO) CAS 78-59-1 | Introduction Chemical Name: IPHO, Isophorone, 3,5,5-Trimethyl-2-Cyclohexene-1-One, 1,1,3-Trimethyl-3-cyclohexene-5-one Molecular Formu... |
