Methylated Urinary Aldehyde Resin
Methylated Urinary Aldehyde Resin: Properties and Applications
Table 1: Key Characteristics of Methylated Urinary Aldehyde Resin
| Property | Specification | Importance |
|---|
| Chemical Structure |
Modified urea-formaldehyde polymer |
Determines reactivity and stability |
| Methylation Degree |
20-40% |
Affects solubility and curing properties |
| Solid Content |
60-70% |
Impacts formulation viscosity |
| pH Value |
7.5-9.0 |
Influences storage stability |
| Viscosity (25°C) |
200-800 cps |
Critical for application methods |
| Shelf Life |
6-9 months |
Requires cool, dry storage |
Table 2: Industrial Applications and Performance
| Application | Function | Benefits |
|---|
| Wood Adhesives |
Plywood/particleboard binder |
Fast curing, improved water resistance |
| Foundry Coatings |
Sand binder |
Excellent thermal stability |
| Textile Finishing |
Wrinkle-resistant agent |
Enhanced fabric durability |
| Paper Strengthening |
Wet-end additive |
Increased wet tear strength |
| Abrasive Materials |
Bonding agent |
Improved grit retention |
Table 3: Comparison with Conventional Urea Resins
| Parameter | Methylated Resin | Standard UF Resin |
|---|
| Formaldehyde Emission |
30-50% lower |
Higher emission |
| Water Resistance |
20% improvement |
Moderate resistance |
| Cure Speed |
15-20% faster |
Standard curing |
| Alkali Resistance |
Excellent |
Poor |
| Storage Stability |
6-9 months |
3-6 months |
Table 4: Recommended Formulation Guidelines
| Component | Wood Adhesive (%) | Foundry Binder (%) | Textile Finish (%) |
|---|
| Resin |
55-65 |
60-70 |
40-50 |
| Catalyst |
0.5-1.5 |
1-2 |
0.3-0.8 |
| Filler |
15-25 |
10-20 |
– |
| Additives |
2-5 |
3-7 |
5-10 |
| Water |
Balance |
Balance |
Balance |
Table 5: Safety and Environmental Profile
| Parameter | Value | Compliance |
|---|
| Formaldehyde Content |
<0.5% free |
Meets E1 standards |
| VOC Emission |
<50 g/L |
CARB compliant |
| Flash Point |
>100°C |
Non-flammable |
| Biodegradability |
40-60% |
OECD 301B |
| Toxicity (LD50) |
>2000 mg/kg |
Low hazard |
Other supplier products
|
|
Dispersants STD-58685N |
Composition: Organic copolymer solution with pigment-friendly groups
Appearance: yellow transparent solution
Active ingredient: 50%
Solvent: Mix... |
|
|
Industrial formaldehyde |
Introduction
Formaldehyde, chemical formula or HCHO or CH2O, formula 30.03, also known as ant aldehyde, explosion limit: 7.0-73%. It has a strong ... |
|
|
polyester poly （MT670 BAC） |
Introduction
Use:
Binder for coating materials
Relevant identified uses of the substance or mixture and uses advised against
Type of prod... |
|
|
Propylene Glycol Phenyl Ether (PPH) CAS 770-35-4 |
Introduction
Propylene glycol phenyl ether can be used as an excellent high boiling point organic solvent or modifier to replace toxic or odorous ... |
|
|
Tricresyl phosphate (TCP) CAS 1330-78-5 |
1330-78-5 – Names and Identifiers
Name
Tricresyl phosphate
Synonyms
TCPKronitex TCPDisflamol TKPPhosflex LindolTritolyl phospha... |
All supplier products
Same products
