Silicone fluid（MT6000 ）

• 

PRODUCT DESCRIPTION

MT6000 is a silicone fluid based on straight chained polydimethylsiloxane fluid.

APPLICATIONS

• Thermostatic fluids (-50°C – 200°C)

• Dielectric fluids (impregnation of paper for condensers)

• Anti-blotting products for photocopying machines.

• Thinning and plastifying agents for RTV’s and silicone sealants.

• Lubricating and heat protecting agents for textile threads (synthetic sewing threads)

• Ingredients in maintenance products (polishes, wax polishes, floor and furniture polishes, etc.).

• Paint additives (anti-cratering, anti-floating/flooding and anti-scratching effects, etc.).

• Water repellent treatment:

– of powders ( for paints and plastics)

– of fibres : glass fibres

• Release agents (mould release for plastics and metal castings)

• Surfactants for styrene-butadiene foam.

Typical Properties

• Very good resistance to high and low temperatures

• Good combustion resistance

• Good dielectric properties

• Low surface tension

• High compressibility

• Absence of ageing upon exposure to atmospheric agents

• Good oxidation resistance

• Little change in viscosity with temperature

• Good resistance to high and prolonged shear stress

STORAGE AND HANDLING

When stored in the original unopened packaging at a temperature of between –20°C and 50°C, MT6000 may be stored for up to 2 years from its date of manufacture (expiry date). Comply with storage instructions and expiry date marked on the packaging.and recommendations made by material safety datasheet be observed at all times.

PRODUCT SAFETY

The Safety Data Sheet (SDS) should always be read and completely understood prior to the handling of any chemical product. It is important that adequate safety procedures are followed by the user. Information on the toxicity, environmental and industrial hygiene aspects of products may be found in the SDS.

Другие товары поставщика

	Fully Methylated Melamine-Formaldehyde Resin	Introduction Fully Methylated Melamine-Formaldehyde Resin (FMMF): Overview and Key Properties CategoryDetails Chemical Type Hexametho...
	MDF Powder Coating	Feature： -Environmental friendly -No solvents and volatile organic compounds involved which are harmful to the environment -Energy saving,low cu...
	Automotive Interior – Reactive Polyurethane Hot Melt Adhesive (PUR)	Automotive Interior Polyurethane Adhesive: Innovation in Vehicle Design Polyurethane (PU) adhesives have revolutionized automotive interior assemb...
	Water based Adhesive	Introduction The series of water-based adhesive products include two-component water-based polyurethane adhesive, which is widely used in the fiel...
	Benzyl Chloride CAS 100-44-7	Introduction Properties and Applications 1.1 Molecular formula, Molecular weight, Structural formula and CAS No. Molecular formula: C7H7Cl Mole...

Похожие товары

	Epoxy/Polyester Powder Coatings	Продавец: Standard International Group (HK) Limited	Feature: -Good bond ability and mechanical performance -Smooth and glossy -Certified chemical ...
	Polyester Clear Powder Coatings	Продавец: Standard International Group (HK) Limited	This series of product are made of polyester resin (as hardener) and highly transparentmaterials....
	Acrylic Clear Powder Coatings	Продавец: Standard International Group (HK) Limited	Feature: -Excellent exterior exposure durability -Excellent durable high gloss -Excellent clar...
	Polyurethane Powder Coatings	Продавец: Standard International Group (HK) Limited	Feature： -Excellent exterior exposure durability -Good flowing -Excellent chemical resistance ...
	MDF Powder Coating	Продавец: Standard International Group (HK) Limited	Feature： -Environmental friendly -No solvents and volatile organic compounds involved which are...