.

CN089 SMT Wave Soldering Machine Lead Free 670KG Weight With PID Control

CNSMT 10 years production WAVE SOLDERING MACHINE after dip component


Feature

P C Broad width Board width Max200mm
PCB conveyor height PCB transportation height 700±20mm
PCB conveyor speed PCB transport speed 0-1.8m/min
Preheating length Preheat zone length 400mm
Preheating Temperatures Preheat zone temperature Room temperature ~ 180 degrees
Suitable solder type Suitable solder type Lead-free solder, ordinary solder
Preheating capacity Preheat power 2KW
Wave solder pot Wave soldering furnace power 6KW
Solder volume Solder tin capacity Lead-free 120KG
Solder temperature Tin furnace temperature Room temperature ~300 degrees
Temperature control Temperature control method PID control, SSR drive
Flux storage tank Flux capacity Max5.2L
Power requirements power supply 3-phase or single-phase 220VAC
Power for heating up Starting power 8KW
Power for operation Normal operating power 2.0KW-2.5KW
Air supply Gas source 4-7kg/cm2 12.5L/min
Control fashion Whole control method PLC+ Meter/PLC+Touch Screen
Weight weight Max 350kg
Dimensions Dimensions L2200xW1100xH1500



Application

Wave soldering machine basic operating procedures

(Reference)

B1 wave soldering machine basic operating procedures

B1.1 Preparation

a. Check whether the wave soldering machine is equipped with ventilation equipment is good;

b. Check the wave soldering machine timing switch is good;

c. Check if the tin bath temperature indicator is normal.

Method: Adjust the temperature indicator up and down, and then use a thermometer to measure the temperature of the tin bath surface 10-15 mm, and determine whether the temperature changes with it:

d. Check whether the preheater system is normal.

Method: Turn on the pre-heater switch and check if it is warm and the temperature is normal.

e. Check the operation of the cutting knife.

Method: Adjust the height of the blade according to the thickness of the printed circuit board and the length of the remaining component lead. Then tighten and stabilize the blade holder, start the visual inspection of the rotation of the blade, and finally check the failure of the insurance device;

f. Check whether the supply of compressed air to the flux container is normal;

Method: Pour the flux, adjust the inlet valve, start the flux foam, use the sample board to adjust the foam to 1/2 of the plate thickness, and then tighten the IOP valve until the formal operation. Then move this valve, just open the air intake switch;


Отправить запрос, связаться с поставщиком

Кому: Jinchen Electric Technology Co,.Ltd
Ваш E-mail:
Текст письма:


Send to other suppliers

Другие товары поставщика

JUKI SMT Feeder CTFR8MM 0805 Chip Component Led Feeder CE Certification
JUKI SMT Feeder CTFR8MM 0805 Chip Component Led Feeder CE Certification AQ02HP AQ02HP AF05HP AF081E AF08HE AF081P AN05HP AN081E AN08HE AN081C AF121S AF122S AF123S AF12FS AF12NS AF161S AF162S AF163S AF16FS AF16NS AF242S ...
Small CTF081PR 8mm Feeder , Lightweight Juki Feeder High Performance
Small CTF081PR 8mm Feeder , Lightweight Juki Feeder High Performance Supply all juki feeder and juki spare parts.40081758 JUKI CF03HPR 8mm TAPE FEEDER UNIT FOR 060340081759 JUKI CF05HPR 8mm TAPE FEEDER UNIT FOR 10054...
KHY-M77A0-A0 SMT NOZZLE 310A YAMAHA YS12 YG12 YS24 pick and place machine
KHY-M77A0-A0 SMT NOZZLE 310A YAMAHA YS12 YG12 YS24 pick and place machine KHY-M1309-A1 COVER 9 ASSY. 1 (2008/12/2) MEX0091 OK2 KHY-M1309-10 COVER 9-1 1 (2008/12/2) MEX0091 OK3 KHY-M130A-02 COVER 9-2 1 (2008/12/2) MEX0091 ...
Hitachi HTGD Screen Printing Squeegee Blades For Solder Paste Printer
Hitachi HTGD Screen Printing Squeegee Blades For Solder Paste Printer Hitachi HTGD printer squeegee SMT Stencil Printer Squeegee 150-600MM IN STORK Quick Detail SMT HCSqueegees/SMD SqueegeesSMT HCSolder paste prin...
SMT panasonic Nozzle cm602 cm402 npm 1001 1002 1003 1004 1005 ORIGINAL led
SMT panasonic Nozzle cm602 cm402 npm 1001 1002 1003 1004 1005 ORIGINAL led CM602 12N210098763AB N210007284AB NPMN510041345AA 2N510067900AA MTNS000238AA N510028410AA N610099746AA N510053249AA N510049696AA N6100...
Все товары поставщика

Похожие товары

China factory Top shaft oil differential pressure switch BP-CMS01 for power station
China factory Top shaft oil differential pressure switch BP-CMS01 for power station Продавец: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD "China factory Top shaft oil differential pressure switch BP-CMS01 for power station Our company ...
China supplier differential pressure switch CMS-1 power plant spare parts
China supplier differential pressure switch CMS-1 power plant spare parts Продавец: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD "China supplier differential pressure switch CMS-1 power plant spare parts Sold by YOYIK. Deyang ...
Electric lunch box
Electric lunch box Продавец: O&K GROUP LIMITED Looking for Quality Products? From electronics to home essentials, fashion to industrial supplies...
Professional Electrical Safety Equipment for Power Work
Professional Electrical Safety Equipment for Power Work Продавец: Shanghai Yongjin Electric Technology Co.,Ltd. Electric Safety Tools are designed for electrical installation, maintenance, inspection, and repa...
Electrical Outdoor Box
Electrical Outdoor Box Продавец: Fly-Dragon Electrical Co., Ltd. Discover durable electrical outdoor box solutions designed for safe connections, organized wiring...