TNID Residual Current Circuit Breaker
Scope of Application
TNID-63 Residual Current Circuit Breaker is used for the circuit of AC 50Hz, rated voltage of 230V for 2 poles, 400V for 4 poles, rated current of 63A, when the personal electric shock or grid leakage current exceeds the specified value, the residual current action circuit breakers cut off the trouble power quickly to protect the personal and electrical equipment, it also can be applied to infrequent transfer and start of the circuit.
TNID-63 RCCB Circuit Breaker are applicable to industrial, commercial, high-rise and civil residence and other places.
Meet the standards: GB 16916.1, IEC 61008-1, obtain CCC, CE certification.
Normal operating conditions and installation conditions
The elevation of the installation site is not more than 2000m.
Ambient air temperature: -5℃~40℃, and average temperature in 24h below +35℃.
Atmospheric conditions: Atmospheric relative humidity at ambient air temperature is + 40℃ for not more than 50%, in the low temperature can have higher relative humidity. Consider the temperature changes in product on the surface of the gel and take special measures.
Pollution degree: 2
Installation conditions: Installed in the place without simpact vibration and invasion of rain and snow: the upper-terminal connects the power, the lower terminal connects load; the inclination of the vertical plane is not more than 2 °. Mounted on the TH35-7.5 steel rail.
Installation categories: Ⅱ, Ⅲ level.
The external magnetic field in the vicinity of the circuit breaker installation site does not exceed 5 times of the geomagnetic field in any direction.
Main parameters and technical performance
Rated voltage(V): 230V~(1P+N), 400V~(3P+N)
Rated curren(A): 25, 40, 63
Rated residual operating current(A): 0.03, 0.1, 0.3
Pole: 1P+N, 3P+N
Rated limiting short-circuit current Inc: 6000A
Rated limiting residual short-circuit current I△c: 6000A
Другие товары поставщика
|
|
BK Industrial Control Transformer |
Scope of Application BK Industrial Control Transformer is suitable for the AC circuit of 50Hz/60Hz, which is used as the control power, local light... |
|
|
TDGC2 Single Phase Voltage Regulator |
Product Overview TDGC2 Single Phase Voltage Regulator is an adjustable autotransformer structure; The coil is wound evenly around the ring-shaped i... |
|
|
TSD Wall Mounted Voltage Stabilizer |
Product Overview TSD Wall Mounted Automatic Servo Voltage Stabilizer are perfectly designed on the basis of the SVC Voltage Stabilizer, possessing ... |
|
|
TXXH Current Limiter |
Scope of Application TXXH Current Limiter is applicable to AC 50Hz, operating voltage 220V, current 0.5-20A, power 110W-4.4kW. The current limiting... |
|
|
TSGC2 Three Phase Voltage Regulator |
Product Overview TSGC2 Three Phase Voltage Regulator is made of three single phase contact voltage regulators adopting "Y"-shaped connection; the c... |
Все товары поставщика
Похожие товары
