DO Signal (SIS) Input 24V DC 5A Safety Relay
These safety relay are suitable for the application of E-Stop button, safety gate and DO signal from SIS, with several contacts output.
The emergency stop safety relay can be operated in single or double channel mode, manual or automatic reset, and with the function of monitoring the short circuit between channels.
Features & Advantages of DO Signal (SIS) Input 24V DC 5A Safety Relay
Several contacts output
Low start-up inrush current
Parameter of DO SIS SignalInput 24V DC 5A Safety Relay
|
CZSR8001-3A1B |
CZSR8001-2A2B |
|
|
Supply voltage |
24V DC |
24V DC |
|
Voltage tolerance |
||
|
Current consumption |
≤90mA (24V DC) |
≤90mA (24V DC) |
|
Input current |
≤50mA (24V DC) |
≤50mA (24V DC) |
|
Cable resistance |
≤15Ω |
≤15Ω |
|
Input devices |
DO signals |
DO signals |
|
Number of contacts |
3NO+1NC |
2NO+2NC |
|
Contact material |
AgSnO2 + 0.2 µm Au |
AgSnO2 + 0.2 µm Au |
|
External contact fuse protection |
10A gL/gG NEOZED (NO); |
10A gL/gG NEOZED (NO); |
|
6A gL/gG NEOZED (NC) |
6A gL/gG NEOZED (NC) |
|
|
Utilisation category |
In accordance with EN60947-5-1: |
In accordance with EN60947-5-1: |
|
AC-15, 5A/230V; DC-13, 5A/24V |
AC-15, 5A/230V; DC-13, 5A/24V |
|
|
Switch-on delay |
≤300ms |
≤300ms |
|
Delay-on de-energisation |
≤30ms |
≤30ms |
|
Recovery time |
≤100ms |
≤100ms |
|
Supply short interruption |
20ms |
20ms |
|
EMC |
EN60947, EN61000-6-2, EN61000-6-4 |
EN60947, EN61000-6-2, EN61000-6-4 |
|
Vibration |
Vibration frequency: 10Hz~55Hz; |
Vibration frequency: 10Hz~55Hz; |
|
Vibration amplitude: 0.35mm |
Vibration amplitude: 0.35mm |
|
|
Ambient temperature |
-20℃~+60℃ |
-20℃~+60℃ |
|
Storage temperature |
-40℃~+85℃ |
-40℃~+85℃ |
|
Relative humidity |
10%~90% |
10%~90% |
|
Overvoltage category |
Ⅲ |
Ⅲ |
|
Pollution degree |
2 |
2 |
|
Rated insulation voltage |
250V AC |
250V AC |
|
Rated impulse voltage |
6000V (1.2/50us) |
6000V (1.2/50us) |
|
Dielectric strength |
1500V AC, 1min |
1500V AC, 1min |
|
Clearance and creepage distance |
In accordance with EN 60947-1 |
In accordance with EN 60947-1 |
|
Safety integrity level |
SIL3 |
SIL3 |
|
Performance level |
PLe |
PLe |
|
Category |
If you want buy a high quality dc power surge protector, please choose Chenzhu!
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Power Transmitter | Power transmittercan transfer complicated current like 0~1A/0~5A/0~10A into industry-standard output, adopting the true RMS detection technology. W... |
 |
Signal SPD | Electronic devices are always threatened by power surges and transients caused by power failures or nearby lightning strikes. Signal SPDsurge pr... |
 |
Power Transmitter | SHANGHAI CHENZHU INSTRUMENT CO., LTD. is a very established provider that specialises in automation safety. We have over 24 years of experience in ... |
|
|
AC Power SPD | The power surge protector for power surge ac unitis designed to prevent transient surge conditions. Large single surge events, such as lightning, c... |
|
|
DC Power SPD | Like all outdoor buildings, photovoltaic devices are vulnerable to lightning strikes. By far the biggest culprit for the power surges that damage s... |
Похожие товары
 |
100mm Flexible Diamond Wet Polishing Pads for Marble & Granite | Продавец: Corediam Tools Co.,Ltd | 100mm Flexible Diamond Wet Polishing Pads for Marble & Granite Corediam diamond wet poli... |
 |
double row diamond cup wheel | Продавец: Corediam Tools Co.,Ltd | double row diamond cup wheel Corediam is a professional supplier China specializing in high-... |
 |
Brazed Single Row Cup Wheel | Продавец: Corediam Tools Co.,Ltd | Brazed Single Row Cup Wheel If you're sourcing for resale and your current supplier's segmen... |
 |
4.5inch stainless steel cutting wheel for angle grinder | Продавец: Corediam Tools Co.,Ltd | Corediam's cutting wheel uses high-quality aluminum oxide particles, taking into account safe... |
 |
Diamond Concrete Blade | Продавец: Corediam Tools Co.,Ltd | Diamond Concrete Blade is laser welded, the segment style is segmented with key-slot, in thi... |
