HDI PCB
HDI PCBs, one of the fastest growing technologies in PCBs, are now available at PCBSky. HDI PCBs contain blind and/or buried vias and often contain microvias of .006 or less in diameter. They have a higher circuitry density than traditional circuit boards.
There are 6 different types of HDI PCBs, through vias from surface to surface, with buried vias and through vias, two or more HDI layer with through vias, passive substrate with no electrical connection, coreless construction using layer pairs and alternate constructions of coreless constructions using layer pairs.
HDI any-layer printed circuit boards are the next technological enhancement of HDI microvia printed circuit boards: all the electrical connections between the individual layers consist of laser-drilled microvias. The main advantage of this technology is that all the layers can be freely interconnected. To produce these circuit boards, PCBSky uses laser-drilled microvias electroplated with copper.
Special Technologies Used with HDI Any-layer Printed Circuit Boards
Edge plating for shielding and ground connection
Minimum track width and spacing in mass production around 40μm
Stacked microvias (plated copper or filled with conductive paste)
Cavities, countersunk holes or depth milling
Solder resist in black, blue, green, etc.
Low-halogen material in standard and high Tg range
Low-DK Material for Mobile Devices
All recognised printed circuit board industry surfaces available
HDI PCB Technology Sheet
PCBSky HDI PCB Structures
PCBSky HDI PCB Capabilities: Microvias PCB
A microvia maintains a laser drilled diameter of typically 0.006" (150µm), 0.005" (125µm), or 0.004" (100µm), which are optically aligned and require a pad diameter typically 0.012" (300µm), 0.010" (250µm), or 0.008" (200µm), allowing additional routing density. Microvias can be via-in-pad, offset, staggered or stacked, non-conductive filled and copper plated over the top or solid copper filled or plated. Microvias add value when routing out of fine pitch BGAs such as 0.8 mm pitch devices and below.
Additionally, microvias add value when routing out of a 0.5 mm pitch device where staggered microvias can be used, however, routing micro-BGAs such as 0.4 mm, 0.3 mm, or 0.25 mm pitch device, requires the use of Stacked MicroVias using an inverted pyramid routing technique.
Any PCB Layer HDI
4/8 mil laser via capture pad size
Material Options
High temperature FR4
Halogen - Free
Welcome to order HDI PCB from PCBSky at a very competitive HDI PCB price.
CUSTOM PCB CHINAFABRICATION
PCBSKY is a professional PCB/FPC manufacturer in China, providing full PCB fabrication services in certified quality standards. We specialize in quick turn PCB & prototypes.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Flexible PCB | Custom enzhen, a TRUE PCB MANUFACTURER. Because of the advantages (for example, cost, space, and weight savings) that flexible and Rigid-Flex-circu... |
 |
Gold Fingers PCB | Gold Fingers PCB Gold Fingers PCB High Tg PCB HIGH TG PCBThick / Heavy Copper PCB THICK / HEAVY COPPER PCB Among the large-scale use of PCI and opt... |
 |
PCB Assembly | PCBSKY is a national enterprise focusing on PCB and PCBA manufacturing for 8 years. The company has a strong engineering team and a professional el... |
 |
Gold Fingers PCB | Among the large-scale use of PCI and optical modules and cable sockets, the goldfingers PCBhas been divided into: long and short gold fingers, brok... |
 |
FR4+High Frequency PCB | High-quality high-frequency materials resources, let your products win at all ☆Rogers, taconic, Arlon, Nelco, Isola's long-term strategic part... |
