Batch Production Fluidized Bed Dryer
DescriptionUnder the negative working pressure by exhausting fan,Website:, fresh air will be firstly filtered during passing through air filter, and then enter the drying chamber after uniformly distributed. The state of fluidization is formed through stirring and negative pressure. Damp air is evaporated and removed rapidly and raw material is dried quickly.1. The structure of fluid bed is round to avoid dead corner.Inside the trolley there is an agitator (as optional choice) in order to avoid agglomeration of raw material and forming dead corner. 2. Manual discharging and automatic discharging as option3. The dryer is in conformity with the requirement of GMP.4. Drying speed is fast and temperature is uniform. In general the drying time is 20-30 minutes per batch.Technical ParametersItemModelInput capacity (kg/batchFanAir volume（m3/h）Air pressure（mmH2O）Power (kw)7.5111518.5223045Power of agitator (kw)0.550.550.550.550.751.101.50Agitating speed (rpm)11Steam consumption (kg/hOperation time (min)15-30 (depends on raw material)HeightRound (mm
Другие товары поставщика
|
|
|
PrincipleHot water,Website:, steam or thermal oil was filled into the dryer jacket, under the vacuum environment, raw material will be agitated and... |
|
|
|
DescriptionZKJG vacuum double paddle dryer is a kind of indirect heated dryer. There is jacket on the body of dryer,Website:, hollow paddle strongl... |
|
|
|
DescriptionClean hot air enter fluid bed dryer through air distributor. The wet raw material fed from feeder forms the fluidizing state by hot air.... |
|
|
|
PrincipleGT model rotary drum dryer is a kind of indirect heating dryer in continuous production. Raw material fed from top or bottom of drum and s... |
|
|
|
DescriptionRaw material was agitated inside the dryer under vacuum condition. Evaporated moisture was sucked out by vacuum pump. Drying efficiency ... |
Все товары поставщика
Похожие товары
