Batch Production Fluidized Bed Dryer
DescriptionUnder the negative working pressure by exhausting fan,Website:, fresh air will be firstly filtered during passing through air filter, and then enter the drying chamber after uniformly distributed. The state of fluidization is formed through stirring and negative pressure. Damp air is evaporated and removed rapidly and raw material is dried quickly.1. The structure of fluid bed is round to avoid dead corner.Inside the trolley there is an agitator (as optional choice) in order to avoid agglomeration of raw material and forming dead corner. 2. Manual discharging and automatic discharging as option3. The dryer is in conformity with the requirement of GMP.4. Drying speed is fast and temperature is uniform. In general the drying time is 20-30 minutes per batch.Technical ParametersItemModelInput capacity (kg/batchFanAir volume(m3/h)Air pressure(mmH2O)Power (kw)7.5111518.5223045Power of agitator (kw)0.550.550.550.550.751.101.50Agitating speed (rpm)11Steam consumption (kg/hOperation time (min)15-30 (depends on raw material)HeightRound (mm
Other supplier products
|
|
DescriptionTriple pass rotary kiln dryer is a kind of modified kiln dryer. There are three layers of drying chamber,Website:, raw material is fed i... |
|
|
PrincipleThe dryer adopt double conical drying chamber,Website:, one side is filtering area and the other side is washing and discharging area. The... |
|
|
PrincipleWet raw materials are fed continuously on the first hot plate on the top of dryer. Raw materials then will be turned and agitated under th... |
|
|
DescriptionUnder the negative working pressure by exhausting fan,Website:, fresh air will be firstly filtered during passing through air filter, an... |
|
|
PrincipleThe liquid or paste form raw material is sprayed into fine mist under the function of high pressure pump. Mist form material then contact ... |
供应产品
Same products