3A PWM Solar Panel Charge Controller 12V/24V Battery Regulator
Pulse Width Modulation (PWM) is the most effective means to achieve constant voltage battery charging by adjusting the duty ratio of the switches ( MOSFET ). InPWM charge controller, the current from the solar panel tapers according to the battery’s condition and recharging needs. When a battery voltage reaches the regulation set point, the PWM algorithm slowly reduces the charging current to avoid heating and gassing of the battery, yet the charging continues to return the maximum amount of energy to the battery in the shortest time.
Features
1. High quality, reliable and economically priced charge controller
2. PWM charge controller is a good low-cost solution for small systems
3. Automatic 12/24v depends on battery voltage.
4. Overcharge and over discharge protection for the battery.
5. 3-stage charging algorithm, impulsive charge, bulk charge, floating charge
Specification
Nominal output(automatic identification): 12V/24V
Operating current: 3A
Short-term load current (60 seconds): 6A
MAX Solar panel: 40W/80W
Over-discharge protection: 10.8V/21.6V
Overcharge protection: 14.4V/28.8V
Float charge: 13.8V/27.6V
PWM charging: YES
Self-Consumption: 1.5mA/3mA
Waterproof Class: IP22
Application
This solar charge controller is perfect for 10W-25W solar panel system.
Installation
1. Connect the battery positive and negative to the controller.
2. Positive and negative load wires to the controller, pay attention to cannot be reversed.
3. Connect the solar panel to the controller correctly.
4. Please follow the above sequence in strict order, otherwise, it may damage the controller. The disassembly order is the opposite of the wiring sequence.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
|
|
3A PWM Solar Panel Charge Controller 12V/24V Battery Regulator | Pulse Width Modulation (PWM) is the most effective means to achieve constant voltage battery charging by adjusting the duty ratio of the switches (... |
 |
12 Volts 20 Watts Epoxy Solar Panel Kits with 10A PWM Charge Controller | The Eco-sources 20Wepoxy solar panel kitswith battery clips, can charge the 12V battery directly, it will output max 90% power on a sunny day. Wate... |
 |
100W Polycrystalline Solar Panel for RV’s, Boats and 12V Systems | Thesepolycrystallinesolar panelscompose of high-efficiency solar cells (approximately 17.4%) with quality silicon material for high module conversi... |
 |
Pre-wired 6 String Solar Panel Combiner Box With 10A Circuit Breakers | Solarphotovoltaic array combinersor solar panel combiner boxes are commonly used to combine several solar panels (or strings of panels) into a comm... |
 |
20 Watts Epoxy Resin Solar Panel for 12V Camping Car Battery Charging | The Eco-sources series of the20Wepoxy solar panelhas been traditionally used for solar lights, solar toys, solar educational kits for kids and stud... |
Похожие товары
 |
Made in China temperature controller WK-P2T(TH) for thermal power plant | Продавец: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "Made in China temperature controller WK-P2T(TH) for thermal power plant Dongfang Yoyik Engineeri... |
 |
Temperature Controller | Продавец: Tinko Instrument (Suzhou) Co., Ltd. | Tinko temperature controller industrialcan improve process efficiency, product quality and minimi... |
 |
Sequence Valve Gate Controller | Продавец: Tinko Instrument (Suzhou) Co., Ltd. | Tinko hydraulic valve gate controllerenables control of valve gate flow sequence and timing for p... |
 |
TSC-02 Stand Alone Controller | Продавец: Tinko Instrument (Suzhou) Co., Ltd. | Tinko TSC-02 integrated dual zone temperature controlleris suitable for small mold. The portable ... |
 |
TSC-01 Stand Alone Controller | Продавец: Tinko Instrument (Suzhou) Co., Ltd. | Tinko TSC-01 integrated single zone hot runner temperature controller is suitable for small mold.... |
