Titanium Carbide Based Steel Bonded Guide Wheel for Steel Rolling Wire

• 

1. Product Introduction

Guide roller is a metallurgical rod guide roller, which is the main consumption spare part in the high-speed wire finishing production process of the steel rolling mill in the steel field, also known as the high-speed finishing guide, guide roller or titanium carbide roller, ensure the red steel smoothly enters the wheel groove, prevent from the winding and tailing and guides clamping. The TiC guide wheel has the high hardness, long service life, excellent wear resistance, good impact resistance, very low friction coefficient and self-lubricating performance and good oxidation and corrosion resistance as well.

2. Product Application

2.1Lighter than Tungsten carbide roller by 55%, Lighter than tool steel than 20%, so the guide roller accelerates from standstill to 35,000 rpm, without damaging the bearing.
2.2Very low coefficient of friction and self-lubricating properties, so the working portion of the guide roller is less worn, and the production can be greatly increased
2.3The coefficient of thermal expansion is close to that of the bearing steel. When the quenching is hot, the bearing will not get stuck. The thermal expansion coefficients of titanium carbide cemented carbide and tungsten carbide hard alloy are very different from those of steel. Therefore, the steel bonded carbide guide roller is more advantageous for bearing anti-seize ability than the two cemented carbide guide rolls.
2.4The micro structure is titanium carbide and high chromium tool steel, which has good thermal fatigue resistance.
2.5Anti-oxidation, less magnetic, non-stick steel.
2.6Annealing hardness is only HRC45-48, easy to process, after quenching, only alittle fine grinding can be processed into finished products, the processing cost is low, so the price is also low. This is also one of the main reasons why titanium carbide guide rolls are superior to tungsten carbide guide rollers.
2.7Hardness HRC62-67, good wear resistance. The service life is 8-10 times that of high speed steel.
2.8Absolutely dense, the pores are almost zero, so it will not break when used and can be reused.
2.9Compared with similar foreign products, the price of Miller MT10 is lower, which greatly saves the production cost of customers.

4.The advantage of Economic Cost(Common guide wheel(Cr12MoV)VSTiC Guide Wheel)
For example as we change the common guide wheel to the TiC guide wheel for one biggest Iron and Steel Group, Below
is the comparsion cost between Common Guide Wheel and TiC Guide Wheel:

Другие товары поставщика

	Low Oxygen Low Free Carbon Titanium Carbide Powder	Titanium carbide TiC powder are mainly used in the steel-bonded cemented carbide, cermet components, tungsten-cobalt-titanium cemented carbide and ...
	Titanium carbide hard alloy round bars with excellent anti-chipping performance	Hard alloy titanium carbide round rods can be tailored into products with varying properties by adjusting the titanium carbide content (typically r...
	Protect the enterprise production carbide guide wheel	Titanium carbide guide wheel is made of high hardness titanium carbide material, with excellent wear resistance, high temperature resistance and ...
	High-quality raw material ratio titanium carbide round bar	Titanium carbide alloy round bar is a high-performance material product made of titanium carbide as the base, by adding metals, ceramics and othe...
	Wear-resistant composite material chromium carbide powder	Chromium carbide powder is a grayish-black powder with a melting point of approximately 1890℃ and a Mohs hardness of 8.5. It features excellent wea...

Похожие товары

	блокировка клещет заклепка машина	Продавец: Уханьская компания "Руйвэйт Машинери"	JM20 machine is a heavy duty radial hydraulic riveting machine, besides the utilization of the fi...
	Высокоскоростной станок для производства несущих лент SMD от XYZ Machine	Продавец: XYZ Tape Reel	Высокоскоростной станок для производства несущих лент SMD от XYZ Machine Управляйте своей цепочк...
	Высокоскоростной станок для производства несущих лент SMD от XYZ Machine	Продавец: XYZ Tape Reel	Высокоскоростной станок для производства несущих лент SMD от XYZ Machine Управляйте своей цепочк...
	High Precision Machining Custom Chassis CNC Machining Aluminum Alloy Parts	Продавец: Ideal Vowin Industry Tech ltd	we are manufacturer specialized in customized fabrication service.  we provide one-stop service...
	China High Quality Sliding Table Saw For Woodworking	Продавец: QINGDAO UNITED ASIA INDUSTRY CO.,LTD	Model No:UA3200SDimension of sliding table saw 3200*375mmGross cut capacity 3200mmWidth of cut be...