Shoe bending Angle tester
Product Introduction:
Shoe bending Angle testing machine is mainly used for outsole rigidity test, with a solid block the front of the shoe clamped on the hard base, with the speed of （100±10）mm/min to increase the force of 30N, observe the Angle of the bending of the outsole, according to its Angle to determine whether the product needs to enter the folding resistance test.
Reference standard:
GB/T 20991-2007 "Test methods for Personal Protective Equipment Shoes" 8.4.1 —— 4
QB/T 1002-2015 Leather Shoes 5.5.4.2
QB/T 2885-2007 "Footwear outsole test methods for folding Performance" 4.2
BS EN ISO 17707-2005
Product Advantages:
Measures Outsole Flexibility/Rigidity: Provides a quantitative assessment of how easily the outsole bends under a specific load.
Standard Compliant: Designed to meet relevant national and international standards for outsole bending stiffness testing.
Preliminary Assessment Tool: Helps determine if an outsole is suitable for more extensive dynamic flexing tests.
Quantitative Result: Provides an objective bending angle measurement at a specified force.
Controlled Test Parameters: Allows for precise control of the speed of force application and the applied load.
Easy to Operate: Relatively straightforward test procedure.
Product Features:
Clamping mechanism designed to securely hold the front part of the shoe or a section of the outsole on a hard base.
Mechanism to apply a controlled force (likely 30N) at a specific speed (100 ± 10 mm/min) to bend the outsole.
System for measuring the bending angle of the outsole when the specified load is applied.
LED digital display to show the measured bending angle.
Robust construction suitable for repetitive testing.
Technical parameters:
1, speed: 100±10/mm/min
2, load: 30kg
3, display: LED digital display
4, Volume: 67X53X65cm
5, Weight: 60kg
6, voltage: AC 220V
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Automatic Long Filament Curl Shrinkage Tester | Automatic Long Filament Curl Shrinkage Tester The automatic long filament curl shrinkage tester is designed for measuring boiling water shrinkage ... |
 |
Car seat belt locking performance tester-QINSUN | Applicable standards: Automotive seat belt locking performance tester mainly meets the following national or industry standards: GB 14166-2013Sea... |
 |
Electronic Rubbing Colour Fastness Tester | Brief Introduction:Electronic rubbing colour fastness testeris designed with a base, rubbing rotation mechanism and a counter. Fix the specimen and... |
 |
Limiting Oxygen Index Tester | Limiting Oxygen Index Tester The oxygen index of the material refers to the minimum oxygen concentration that can maintain the combustion of the ma... |
 |
Reciprocating Wear Tester | Standards ASTM F2496: Scratch hardness and adhesion testing for prints/coatings. ISO 1518-1 & -2: Scratch resistance determination for pain... |
