Racing Seat Headrest Restraint and Front-Rear Impact Testing Machine，Seat headrest restraint and impact test equipment
Whats/App: +86 156 1874 6768
Web: standard-groups.com
The Racing Seat Headrest Restraint and Front-Rear Impact Testing Machine is designed to evaluate the strength and impact performance of racing seat headrest restraint systems. It enables you to perform controlled front and rear impact tests to ensure occupant safety under various conditions. The machine features a user-friendly Windows-based interface with virtual instrument technology, allowing precise operation, real-time monitoring, and efficient data management.
Application
You can use this machine to assess the structural integrity and performance of racing seat headrests and restraint systems in a range of scenarios:
Evaluating headrest strength for new seat designs.
Testing after process modifications or material changes.
Quality verification of incoming seat components.
Random sampling for production quality control.
Reproducing real-world impact conditions to ensure occupant safety.
Commonly tested components with this machine:
Racing seat headrests
Seat restraint assemblies
Front and rear seat structural components
Occupant protection system components
Standards
The machine complies with international and national standards for automotive seat and occupant protection testing, including:
GB 15083‑2019 – Automotive seats, seat anchors, and headrest strength requirements and test methods
ISO/TS 16925:2014‑06 – General testing technical specification for seats and occupant restraint devices
FMVSS 202a – U.S. motor vehicle safety standard for head restraint performance
FMVSS 201 – U.S. motor vehicle safety standard for occupant impact protection
FMVSS 208 – U.S. motor vehicle safety standard for occupant protection performance
Parameters
| Parameter | Details |
|---|---|
| Impact Acceleration Range | 200 g |
| Impact Velocity | 24.1 km/h |
| Velocity Accuracy | ±2.5% (or ±0.5 km/h) |
| Sampling Frequency | 250 kSP/s |
| Pendulum Length | 1250 mm |
| Pendulum Elevation Resolution | 0.1° |
| Acceleration Accuracy | ±5% |
| Impact Hammer Effective Mass | 6.8 kg ±0.05 kg |
| Main Test Bench Dimensions | 3000 × 2000 × 4100 mm |
| Computer Console Dimensions | 600 × 600 × 1500 mm |
| Power Supply | Single-phase AC 220V, 50Hz, 1 kW; Three-phase AC 380V, 50Hz, 3 kW |
Features
Pendulum-based impact testing for precise simulation of front and rear collisions.
Computer interface uses virtual instrument panel technology for intuitive operation.
Test data is reproducible with highlighted key points for easy analysis.
Data is stored in a database, allowing efficient retrieval and review.
Pendulum swing angle adjustable from 0° to 172° for versatile impact testing.
Equipped with safety protective net to ensure operator safety during testing.
Accessories
Data acquisition modules
Pendulum calibration tools
Protective net and support frame
Clamping and fixture devices for headrests and seats
Computer console with software license
Test Procedures
Secure the racing seat and headrest assembly onto the test bench.
Configure impact parameters including velocity, pendulum angle, and sampling frequency via the computer console.
Verify all safety measures, including protective nets, are in place.
Initiate the impact test; pendulum strikes the headrest or restraint system.
Monitor real-time data on acceleration, velocity, and force.
After testing, retrieve the data from the database for analysis.
Inspect the tested component for deformation or failure.
Maintenance Information
Periodically inspect pendulum and pivot points for wear or alignment issues.
Verify and calibrate the impact hammer and data acquisition system regularly.
Ensure the safety protective net and support frame are intact.
Check computer software and database for integrity and proper operation.
Keep the test area clean and free of debris that may affect pendulum movement.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Professional Automotive Wire Cut-Through Tester manufacturer for automotive wires, | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Features (1) High-precision load sensor for accurate measurement. (2) Adjus... |
 |
Micro-hole Detection Instrument | Whats/App: +86 156 1874 6768 Web: standard-groups.com The pinhole tester for aluminum foil is a device specifically used to detect micro - pinhol... |
 |
Laboratory Test Dummy for EV Battery Performance and Safety | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application This dummy is suitable for the following applications: Vibration reliability ... |
 |
Catheter bending resistance test device | Whats/App: +86 156 1874 6768 Web: standard-groups.com Product introduction The tester is composed of a programmable controller, a touch screen, ... |
 |
Spinal Internal Fixation Components System Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard YY/T 0961-2014 (China): Specifies static/fatigue testing protocols for spinal fix... |
Похожие товары
 |
PanEVAP & MVR system | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
 |
PanPHE gasketed plate heat exchangers | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanPHE gasketed plate heat exchangersare designed with easy access for regular servicing and for ... |
