Aircraft Seat Performance Test
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Application
This system is applicable to aviation fuel fire testing of materials and components used in aircraft cabins, with a primary focus on:
Aircraft seat cushions
Seat cushion assemblies
Cushion covers and padding materials
Composite seat components related to fire performance
The FAA-approved NexGen burner provides standardized aviation fuel flame exposure, while the dedicated seat cushion test frame and dynamic motion system allow direct assessment of flame behavior, burning characteristics, and dripping performance under representative test conditions.
Standards
The system is designed to support testing in accordance with the following aerospace fire safety standards:
BSS 7303 – Combustion performance and flame spread behavior of aerospace composite materials
AITM 2.0009 – Determination of flame spread characteristics of aerospace materials
FAR Part 25 Appendix F Part II – Aircraft cabin material combustion, flame spread, and smoke toxicity requirements
Parameters
| Item | Specification |
|---|---|
| Overall dimensions | 1500 mm (W) × 1800 mm (H) × 900 mm |
| System weight | 150 kg |
| Power requirement | 220 V, 10 A |
| Operating temperature | 10°C to 35°C |
| Fuel type | Aviation kerosene |
| Air supply | Minimum 120 PSI compressed air |
| Flame temperature capability | ≥ 2000 ± 50 ℉ |
| Heat flux output | ≥ 10.6 W/cm² |
| Temperature control bath | ≥ 2 × 0.14 m³ |
Accessories
The system is supplied with the following components:
NexGen aviation fuel burner
Seat cushion test frame
Dynamic motion system
Fuel temperature control ice bath
Thermocouple calibration comb
Radiant heat flux sensor with cooling unit
Powder-coated steel support frame with digital scale
Movable seat cushion test fixture
Movable drip collection tray
Burner thermal insulation blanket
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Bone Cement Four-Point Bending Fatigue Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard YY/T 1429 (China): Specifies four-point bending fatigue tests for acrylic resin b... |
 |
Geomembrane Fracture Resistance Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard ASTM D7176(Standard Test Method for Determining the Resistance of Geomembranes ... |
 |
Safety Helmets Acceleration Impact & Penetration Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard GB/T 2812: Safety Helmets (China National Standard) Equivalent Compliance: ISO 6... |
 |
Rubber Mooney Viscosity Measuring Instrument (for Rubber Mooney Viscosity Tester) | Whats/App: +86 156 1874 6768 Web: standard-groups.com Test principle: The Mooney viscometer is used to measure the viscosity of rubber under spe... |
 |
Total Hip Joint Prostheses Wear Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard YY/T 0651.1-2016 (China): Specifies wear testing parameters for total hip prosthe... |
Похожие товары
 |
PanEVAP & MVR system | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
 |
PanPHE gasketed plate heat exchangers | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanPHE gasketed plate heat exchangersare designed with easy access for regular servicing and for ... |
